ALL ELECTRONICS COMPONENTS
Showing 1–12 of 6986 results
-
BZV55-C5V1 (SMD) 5.1V 0.5 watt Zener diodes box of 2500pcs
Rs. 1499.00Features:-
- Non-repetitive peak reverse power dissipation: ≤ 40 W
- Total power dissipation: ≤ 500 mW
- Voltage tolerance : ±5 %
- Working voltage : 5.1V
- Low differential resistance
- Small hermetically sealed glass SMD package
-
CA3130 CMOS Op-Amplifier IC (DIP-8 Package)
Rs. 129.00Specification:-
- DC Supply Voltage: 16 V
- Differential Input Voltage: 8 V
- DC Input Voltage: (V+ +8V) to (V- -0.5V)
- Input-Terminal Current: 1mA
- Operating Temperature Range: -50°C to 125°C
- Output Short-Circuit Duration: Indefinite
-
LL914 100V ,MINI MELF High Speed Switching Diodes Pack of 5pcs
Rs. 29.00Specification:-
- Maximum repetitive peak reverse voltage : 100V
- Maximum average rectified current : 75mA
- Maximum reverse recovery time : 4.0ns
- Power dissipation : 250mW
- Package : MINI MELF
-
2200uf / 80V Aluminum Electrolytic Capacitors (35 X 50)mm pack of 5 pcs
Rs. 899.00Specification
- Terminals:2
- Material: Aluminum
- Capacitor Size: 35 X 50mm
- Voltage Rating : 80V
- Capacitance: 2200uf
- Capacitance tolerance : ±20%(M)
-
11MHz Electronic quartz crystal oscillators KDS11.0592 through hole 2 pins pack of 100pcs
Rs. 699.00Specification:-
- High-quality product
- Load Capacitance : 18pF
- Frequency Tolerance : 30ppm
- Frequency Temperature Stability : 20ppm
- Resonance Resistance : 40 ohms
- High frequency of operation
- Automatic amplitude control and frequency drift
-
2000Pcs 8.2K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 8.2K MR Ω ohm MF Through Hole Resistors Axial Lead
Rs. 649.00Specifications
- Resistance: 8.2K ohm (Ω)
- Resistor type : carbon film resistor
- Tolerance: 5%
- Power rating: 1/2Watt
- Maximum working voltage: 250V
-
Electronic Spices 50Pcs 3.3 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 3.3 MR Ω ohm MF Through Hole Resistors Axial Lead
Rs. 29.00Specifications
- Resistance: 3.3 ohm (Ω)
- Resistor type : carbon film resistor
- Tolerance: 5%
- Power rating: 1/4Watt
- Maximum working voltage: 250V
-
220uf 6.3V Aluminum Electrolytic Capacitors (6.3 X 11 mm) pack of 5pcs
Rs. 29.00Specification
- Rating Voltage = 6.3V
- Material = Aluminum
- Capacitor Size = 6.3 x 11 mm
- Impedance (O)max. 20°C 1000KHz = 130
- Ripple current = 250
- DC Leakage Current = ≤ 0.01CV (µF) at 20°C
- Capacitance Tolerance = ±20%(M)
- Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.
- Rating Voltage = 6.3V
-
0.3 inch 2 digit Red display color 7 segment LED display COMMON CATHODEs pack of 20pcs
Rs. 299.00Specification:-
- Number of digit : 2
- Display type : 7 segment
- Configuration : common cathode
- Number of pins : 10
- LED color : Red
- Operating current : 10mA
- Length of the LED : 15mm
- Width of the LED : 14mm
-
12K ohm 0805 High power SMD thick film chip resistor pack of 50pcs
Rs. 29.00Specifications
- Case type : 0805
- Resistance : 12K ohm
- Tolerance : ± 5%
- Power rating : 1/8 watt
- Element type : Thick film chip
- Operating voltage range : 180V to 220V
-
BU407 NPN Transistors 150V (TO-220 Package) Pack of 100
Rs. 500.00Specification:-- Transistor Polarity - NPN
- Collector-Emitter Voltage (VCEO) - 150V
- Continuous Base Current (IB) - 4A
- Continuous Collector Current (IC) - 5A
- Emitter cut-off current (IC) - 500mA
- Operating Temperature Range - (-65 - 150°C)
- Transition Frequency (fT) - 10MHz
-
0.022μF 223J 630V CL21 Metallized Polyester Film Capacitor Pack of 5pcs
Rs. 39.00Specification:-
- Rated voltage : 630V
- Dimensions = 11.0mm(W)
- Dimensions = 9.0mm(H)
- Dimensions = 5.0mm(T)
- Dimensions = 8.0mm(P)
- Standard = GB 7335 (IEC 384-2)
- Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
- Insulation Resistance = ≤7500M Ω