ALL ELECTRONICS COMPONENTS

2200uf 25V Aluminum Electrolytic Capacitors (16 X 25 mm) pack of 5pcs

Specification

• Rating Voltage = 25V
• Material = Aluminum
• Capacitor Size = 16 x 25 mm
• Impedance (O)max. 20°C 1000KHz = 23
• Ripple current = 1850
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

MMBT3906LT1 PNP SOT-23 Bipolar Transistors Pack of 5

Specification:-

1. Type of transistor: PNP
2. Polarity: Bipolar
3. Collector-emitter voltage (BVCEO): 40V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 250MHz
7. Gain H(fe): 100/300
8. Collector current:  200mA

MCP3008 8-Channel 10-Bit A/D Converter with SPI Interface IC (DIP-16 Package)

Specification:-

• Single supply operation: 2.7V – 5.5V
• 200 ksps max. sampling rate at VDD = 5V
• 75 ksps max. sampling rate at VDD = 2.7V
• 500 µA max. active current at 5V
• All Inputs and Outputs w.r.t. VSS: - 0.6V to VDD + 0.6V
• Storage Temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +150°C
• Soldering temperature of leads (10 seconds): +300°C
• ESD Protection On All Pins (HBM): ≥ 4 kV

IRF840 500V 8A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 500V
• Continuous Drain Current (Id): 8A
• Drain-Source Resistance (Rds On): 850mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 39 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 125W

25 ohm ( Ω ) 5 watts Fusible ceramic cement power resistors pack of 250pcs

Specifications

1. Resistance : 25 ohm (Ω)
2. Tolerance : 5%
3. Resistor type : fusible ceramic cement power resistor
4. Power rating : 5W
5. Can withstand in high-energy and high-voltages at high temperatures
6. Reliable and offers a long service life

0.0015μF 152J 100V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 100V
• Dimensions = 11.0mm(W)
• Dimensions = 10.0mm(H)
• Dimensions = 6.0mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

2000 Pcs 220K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 220K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 220K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

DO-201AD, SF54 200V Super Fast Rectifiers Diode pack of 5pcs

Specification

1. Maximum respective peak reverse voltage : 200v
2. Maximum average rectified current : 5.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-201AD
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 0.95V
7. Maximum reverse recovery time : 35ns

0.56 inch 2 digit Green display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common anode
4. Number of pins : 10
5. LED color : Green
6. Operating current : 10mA
7. Length of the LED : 25mm
8. Width of the LED : 19mm

2.2μF 225J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 18.0mm
8. Dimensions of Length : 33.0mm

0.018μF 183J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 19.0mm(W)
• Dimensions = 17.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 13.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

Electronic Spices 20Pcs 680K Ohm (Ω) 2watt ±5% Tolerance 680K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 680K ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V