ALL ELECTRONICS COMPONENTS

3.3K ohm 0805 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 0805
2. Resistance : 3.3K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V

BZV55-C6V2 (SMD) 6.2V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 6.2V
• Low differential resistance
• Small hermetically sealed glass SMD package

MBS, MB6S 0.5A 600V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : MBS
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 0.5A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 35A
6. Maxim forward voltage : 1.0V

1K ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 0603
• Resistance: 1K
• Tolerance :  ± 5%
• Power Rating (Watt) : 0.25W, 1/4W
• Operating Temperature : -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

74LS194 4-bit Bi-directional Shift Register IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: –65°C to +150°C

CD4027 Dual JK Flip Flop IC (DIP-16 Package)

Specification:-

• Supply Voltage:  3V to +18V
• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• Maximum input current of 1 µA at 18 V
• Temperature range; 100 nA at 18 V and 25°C

TC4420 6A High-Speed MOSFET Driver IC

Specification:-

• Supply Voltage: +20V
• Input Voltage: – 5V to VDD + 0.3V
• Input Current (VIN > VDD): 50 mA
• High Capacitive Load Drive Capability: 10,000 pF
• Wide Input Supply Voltage Operating Range: – 4.5V to 18V
• Package Power Dissipation 5-Pin TO-220 (With Heatsink): 12.5W
• Output Voltage Swing to Within 25 mV of Ground or VDD
• Thermal Impedances (To Case) 5-Pin TO-220: 10°C/W

Electronic Spices 50Pcs 3.9k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 3.9k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 3.9K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

0.10μF 104J 250V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250V
• Dimensions = 24.0mm(W)
• Dimensions = 19.0mm(H)
• Dimensions = 12.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

1N4750A 27V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 27V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 750mA

BC338 800mA 25V TO-92 Package General purpose NPN transistor pack of 10 pcs

Specification

1. Collector-Emitter Voltage (VCEO): 25V
2. Continuous Collector Current (IC): 800mA
3. Transition Frequency (fT): 250MHz
4. DC Current Gain (hFE): 120-630
5. Operating Temperature Range: -55 - 150°C
6. Transistor type  :  NPN Transistor

6.8K ohm 0805 High power SMD thick film chip resistor pack of 50pcs

Specifications

1. Case type : 0805
2. Resistance : 6.8K ohm
3. Tolerance :  ± 5%
4. Power rating : 1/8 watts
5. Element type : Thick film chip
6. Operating voltage range : 180V to 220V