ALL ELECTRONICS COMPONENTS

TL084 Quad JFET Input Operational Amplifier IC (DIP-14 Package)

Specification:-

• Number of channels: 4
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typical
• Low Power Consumption: 1.4 mA/ch Typical

220uF 16V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 220uF
• Rated Voltage: 16V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

2000Pcs 150 Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 150 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 150 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

2000Pcs 150K Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 150K MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 150K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

0.33μF 334K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.2mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 5.0mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

1N4734A 5.6V 1 watt Zener diodes box of 2500pcs

Specification

• Nominal Zener Voltage (VZ): 5.6V
• Power dissipation (PZ): 1300mW (practically 500mW)
• Zener regulator current (IZm): 810mA

220uf 63V Aluminum Electrolytic Capacitors (10 X 20 mm) Pack of 5pcs

Specification

• Rating Voltage = 63V
• Material = Aluminum
• Capacitor Size = 10 x 20 mm
• Impedance (O)max. 20°C 1000KHz = 73
• Ripple current = 520
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

3.3μF 335J 250V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 250V
• Dmax = 14.0mm
• Lmax = 33.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

0.082μF 823K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 7.3mm(W)
3. Dimensions = 8.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 5.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω

2SC3052 NPN SOT23-3L Bipolar Transistors Pack of 5pcs

Specification:-

• Polarity: NPN
• Maximum Collector-Base Voltage |BVCBO|: 50 V
• Maximum Collector-Emitter Voltage |BVCEO|: 50 V
• Maximum Emitter-Base Voltage |BVEBO|: 6V
• Forward Current Transfer Ratio (hFE), MIN: 150
• Collector Dissipation: Pcw =150mW

HER207 800V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 800V
• Peak forward surge current 8.3ms single half sine- wave : 60A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 70ns
• Package : DO-15

KBPC25, KBPC1510 15A 1000V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 15.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 175A
6. Maxim forward voltage : 1.1V