ALL ELECTRONICS COMPONENTS

DBS, DB107S 1A 1000V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : DBS
2. Maximum respective peak reverse voltage : 1000v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

BC818LT1 500mA 25V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 25V
4. Power dissipation: 300mW
5. Case: SOT23
6. Frequency: 170MHz
7. Gain H(fe): 100/630
8. Collector current:  500mA

74LS189 64-Bit RAM with 3-State Output IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage: 0.4 to 0.5V
• Output Short Circuit Current: -80mA
• Power Supply Current: 40mA
• 64-Bit Storage Capacity

1K ohm ( Ω ) single turn trimpot variable resistors 3386P-1-102LF pack of 50pcs

Specifications

1. Type: Single-turn variable resistor
2. Resistance value: 1K Ω
3. Power rating: 300V
4. Temperature Range: -55 °C to +125 °C
5. Rotational cycle: 200 cycles

500 ohm ( Ω ) single turn trimpot variable resistors 3386P-1-501LF pack of 20pcs

Specifications

1. Type                            : Single turn variable resistor
2. Resistance value       : 500 Ω
3. Power rating              : 300V
4. Temperature Range : -55 °C to +125 °C
5. Rotational cycle        : 200 cycles

BZV55-C6V8 (SMD) 6.8V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance: ±5 %
• Working voltage: 6.8V
• Low differential resistance
• Small hermetically sealed glass SMD package

10uF 16V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 10uF
• Rated Voltage: 16V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

Electronic Spices 50Pcs 39 Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 39 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 39 ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

0.010μF 103J 400V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 400V
• Dimensions = 17.0mm(W)
• Dimensions = 14.0mm(H)
• Dimensions = 9.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

680uf / 100V Aluminum Electrolytic Capacitors (35 x 30)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 35 x 30mm
4. Voltage Rating :  100V
5. Capacitance: 680uf
6. Capacitance tolerance : ±20%(M)

TL072CP Low Noise Dual JFET Op-Amplifier IC (DIP-8 Package)

Specification:-

• Number of channels: 2
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Input bias current: 200(Max) 
• Low Noise Vn = 18 nV/√Hz
• High Slew Rate: 13 V/μs (Typical)
• Low Total Harmonic Distortion: 0.003% (Typical)

A-405, FR105SG 600V Glass Passivated Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case :  A-405
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 1.3V
7. Maximum reverse recovery time : 250ns