ALL ELECTRONICS COMPONENTS

SMA(G), SK210 100V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA(G) 
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.85V

0.15μF 154K 100V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.2mm(W)
3. Dimensions = 9.0mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

RL207G 1000V, DO-15 Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 1000V
• Maximum average rectified current : 2.0A
• Peak forward surge current 8.3ms single half sine- wave : 70A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-15

BC857LT1 100mA 45V SOT-23 PNP Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 45V
4. Power dissipation: 250mW
5. Case: SOT23
6. Frequency: 100MHz
7. Gain H(fe): 125/800
8. Collector current:  100mA

KBPC25, KBPC1504 15A 400V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 400v
3. Maximum average rectified current : 15.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 175A
6. Maxim forward voltage : 1.1V

SMA(G), SK16 60V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA(G)
2. Maximum respective peak reverse voltage : 60v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 0.70V

DO-41, 1N4946G 600V Glass Passivated Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case : DO-41
2. Maximum respective peak reverse voltage : 600v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 1.3V
7. Maximum reverse recovery time : 250ns

INA126 Micro Power Instrumentation Op-Amplifier IC (DIP-8 Package)

Specification:-

• Low offset voltage: 175 μV maximum
• Wide Supply Range: ±1.35 V to ±18 V
• Low Offset Voltage: 250-μV Maximum
• Low Offset Drift: 3-μV/°C Maximum
• Low Noise: 35 nV/√Hz
• Low Input Bias Current: 25-nA Maximum
• Storage temperature: 55°C to 125 °C

MM1Z7B5 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 7.5V
• Minimum Zener voltage : 7.350V
• Maximum Zener voltage : 7.650V
• Maximum Reverse Current : 0.5µa
• Package : SOD-123

820uf / 200V Aluminum Electrolytic Capacitors (30 x 40)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 30 x 40mm
4. Voltage Rating :  200V
5. Capacitance: 820uf
6. Capacitance tolerance : ±20%(M)

0.3 inch 2 digit Green display color 7 segment LED display COMMON ANODEs pack of 20pcs

Specification:-

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common anode
4. Number of pins : 10
5. LED color : Green
6. Operating current : 10mA
7. Length of the LED : 15mm
8. Width of the LED : 14mm

0.0018μF 182J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω