ALL ELECTRONICS COMPONENTS

0.018μF 183J 630V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 630V
• Dimensions = 24.0mm(W)
• Dimensions = 16.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 18.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

KBP, KBP3005 3A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBP
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 80A
6. Maxim forward voltage : 1.1V

10uf / 400V Aluminum Electrolytic Capacitors (10 X 20)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 10 X 20mm
4. Voltage Rating :  400V
5. Capacitance: 10uf
6. Capacitance tolerance : ±20%(M)

47/25V Electrolytic Capacitor Pack of 5pcs (5×11)mm

Specification:-

• Capacitor Value – 47
• Voltage  - 25V
• Operating temperature: -40ºC to 125ºC
• Tolerance - ±20%
• Size - 5x11

CD4067 16-Channel Analog Multiplexer/Demultiplexer IC (DIP-24 Package)

Specification:-

• Supply current: 0.04 uA
• 5-V, 10-V, and 15-V parametric ratings
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V
• Temperature range; 100nA at 18 V and 25°C
• Low ON resistance: 125  (typ.) over 15 Vp-p signal-input range for VDD – VSS = 15 V
• High OFF resistance: channel leakage of ±10 pA (typ.) @ VDD – VSS = 10 V
• Matched switch characteristics: RON = 5 (typ.) for VDD – VSS = 15 V

T1117-ADJ SOT 223 Voltage Regulator Pack of 2500pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 1.485 - 1.515
5. Storage Temperature:  -65° C to +150° C

9015 Bipolar PNP transistors box of 2000pcs

Specification

1. Transistor Type  :  9015 Bipolar PNP transistor
2. Max Collector Current  :  -100mA
3. Max Collector-Emitter Voltage  :  -45V
4. Max Collector-Base Voltage  :  -50V
5. Max Emitter-Base Voltage  :  -5V
6. Max Collector Dissipation  :  400mW

0.0047μF 472J 100V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 100V
2. Dimensions = 10.5mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance = > 2500S Ω 

HER106S 600V ,A-405 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 600V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 70ns
• Package : A-405

TDA7000 FM Radio Receiver IC

Specification:-

• Supply Voltage: 12V
• Frequency of 70 kHz
• Oscillator voltage: VP−0,5 to VP + 0,5 V
• Operating Temperature Range: 0°C to +60°C
• Storage temperature range: −55 to +150 °C

220uf / 63V Aluminum Electrolytic Capacitors (10 X 16)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 10 X 16mm
4. Voltage Rating :  63V
5. Capacitance: 220uf
6. Capacitance tolerance : ±20%(M)

KBPC25, KBPC25005 25A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V