ALL ELECTRONICS COMPONENTS

KBPC25-W, MB251W 25A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC25-W
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 25.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 300A
6. Maxim forward voltage : 1.1V

SMBJ5.0A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 6.40V
3. Maximum Breakdown voltage : 7.08V
4. Stand-off voltage : 5.0
5. Maximum reverse leakage current : 800
6. Maximum peak pulse current : 65.2A
7. Maximum clamping voltage : 9.2V
8. Power dissipation : 600W

KBPC8, KBPC801 8A 100V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBPC8
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 8.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 250A
6. Maxim forward voltage : 1.1V

BCX70J 200mA 45V SOT-23 NPN Bipolar transistors pack of 5pcs

Specification

1. Type of transistor: NPN
2. Polarisation: bipolar
3. Collector-emitter voltage: 45V
4. Power dissipation: 250mW
5. Case: SOT23
6. Frequency: 100MHz
7. Gain H(fe): 250/460
8. Collector current:  200mA

1.5μF 155J 100V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

1. Rated voltage = 100V
2. Dmax = 10.0mm
3. Lmax = 28.0mm
4. Reference Category = GB 7332 (IEC 384-2)
5. Climatic Category = 40/085/21
6. Voltage Proof = 1.6UR (5s)
7. Dissipation Factor = ≤1.0% (20°C, 1KHz)

IRF740 400V 10A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 400V
• Continuous Drain Current (Id): 10A
• Drain-Source Resistance (Rds On): 0.54 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 53 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 134W

0.0018μF 182J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 16.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 7.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

SMA, S2A 50V Surface Mount General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 2.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 60A
6. Maxim forward voltage : 1.1V

KBP, KBP302 3A 200V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBP
2. Maximum respective peak reverse voltage : 200v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 80A
6. Maxim forward voltage : 1.1V

0.018μF 183J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.0mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω

SR280/SB280 80V ,DO-15 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 80V
• Maximum average rectified current : 2.0A
• Peak forward surge current 8.3ms single half sine- wave : 60A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : DO-15

IR2110 High and Low Side Driver SMD IC

Specification:-

• High-side floating supply voltage: -0.3 to 525 V
• High-side floating supply offset voltage: VB -25 to VB +0.3 V
• High-side floating output voltage: VS -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25 V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply voltage: -0.3 to VSS+25 V