ALL ELECTRONICS COMPONENTS

MAX705 Supervisory circuits power supply monitor with reset DIP 8 pin IC

Specification:-

1. Operating voltage range: 2V to 5.5V
2. Supply current: 150 µA
3. Reset threshold: 4.5V
4. Reset threshold hysteresis: 40mV
5. Reset pulse width: 280ms
6. Watchdog timeout period: 1.00 to 2.25 seconds

2281 Dual channel LED lever meter driver monolithic DIP 16 pins IC pack of 10pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation : 600mW
4. Voltage gain : 13.4 dB
5. Capable of driving red, green, and yellow LED's
6. High input impedance
7. Applicable to 10 dot mono output

1N5819 25A 600V Forward voltage diode pack of 20pcs

Features:-

• The average forward current is 1A
• Forward Surge Current is 25A
• Forward Voltage Drop 600mV at 1A
• The peak reverse voltage is 40V
• RMS Reverse Voltage is 28V

0.1μF 104J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V
2. Dimensions = 15.0mm(W)
3. Dimensions = 11.0mm(H)
4. Dimensions = 7.5mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

FPS 0204M7R1 OEM Flat Panel MCMA Planar Speaker 4 Ohm 8W

Specification:-

• Impedance value : 4Ω (ohm)
• Power rating: 8W
• Shape: Rectangle
• range output from 240 to 20,000 Hz.
• Extremely slim design.

TDA2050 32 watt Audio power amplifier 5 pins IC pack of 50pcs

Specification

1. Low-frequency class A and B amplifier
2. Operating voltage :  -25V to +25V
3. Output :  28Watts with 4Ω speaker
4. Voltage gain:  80dB
5. Supply voltage rejection:  45dB
6. Output power: up to 50 watts
7. Short circuit and thermal protection

7cm x 3cm Copper clad double side universal printed circuit board or PCB pack of 1pcs

Specification

1. Copper clad coating PCB
2. Dimension : 7cm x 3cm
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

MQ5 LPG and Natural flammable gas detection sensor pack of 1pcs

Specification

1. High-quality aluminum oxide body
2. Operating voltage  :  5V
3. Target gas : LPG
4. Sensing resistance  :  2kΩ to 20KΩ
5. Load resistance  :  200kΩ (Adjustable)
6. Heating consumption  :  lower than 800mW
7. Concentration scope : 200 to 10,000ppm

INA125P Instrumentation amplifier with precision voltage reference DIP 16 pin IC

Specification

1. Wide supply range:-
   • Single supply voltage : 2.7V to 36V
   • Dual supply voltage : 1.3v to 18V
2. Number of amplifier : 2
3. Input offset voltage :  250µV
4. Bandwidth : 150KHz
5. Slew rate :  0.02V/µs
6. Amplifier output : single-ended

12V 7A Sugar cube relays 5 pin pack of 10pcs

Specifications

1. Trigger voltage: 12V
2. Nominal current: 30mA
3. Maximum AC load current: 10A
4. Maximum DC load current: 10A
5. Maximum switching: 300 operating/minute
6. Compact 5-pin configuration

0.68μF 684J 400V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V
2. Dimensions = 25.0mm(W)
3. Dimensions = 20.0mm(H)
4. Dimensions = 13.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

11 mm Reed switch magnetic sensor pack of 2pcs

Specification

1. Hard glass protection
2. Small, cheap and easily available
3. Current Rating :  0.1a
4. Power/Voltage :  30v dc
5. Switch Configuration :  SPST
6. Package includes : 5 pieces