ALL ELECTRONICS COMPONENTS

1N5819 25A 600V Forward voltage diode pack of 20pcs

Features:-

• The average forward current is 1A
• Forward Surge Current is 25A
• Forward Voltage Drop 600mV at 1A
• The peak reverse voltage is 40V
• RMS Reverse Voltage is 28V

KA431AZ Programmable shunt regulator transistor pack of 20pcs

Specification:-

1. Transistor type  :  Programmable shunt regulator transistor
2. Programmable Output Voltage  :   2.5V to 36V
3. Dynamic Output Impedance  :  0.2
4. Current Capability  :  1.0 to 100 mA
5. Low Output Noise Voltage
6. Fast Turn−on Response

0.1μF 104J 250V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V
2. Dimensions = 15.0mm(W)
3. Dimensions = 11.0mm(H)
4. Dimensions = 7.5mm(T)
5. Dimensions = 10.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

Light dependent resistors sensor 12 mm (LDR) GL12528 pack of 2pcs

Specification:-

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  250V
5. Max. power  :  200W
6. Package includes : 5 pieces

FPS 0204M7R1 OEM Flat Panel MCMA Planar Speaker 4 Ohm 8W

Specification:-

• Impedance value : 4Ω (ohm)
• Power rating: 8W
• Shape: Rectangle
• range output from 240 to 20,000 Hz.
• Extremely slim design.

HCNR201 High linearity analog optocouplers DIP 8 pin IC

Specification

1. Output type: Photodiode
2. Number of channels: 1
3. Isolation voltage: 5000 Vrms
4. If - Forward Current: 20 mA
5. Vf - Forward Voltage:  1.6 V
6. Power Dissipation: 60 mW

TDA2050 32 watt Audio power amplifier 5 pins IC pack of 50pcs

Specification

1. Low-frequency class A and B amplifier
2. Operating voltage :  -25V to +25V
3. Output :  28Watts with 4Ω speaker
4. Voltage gain:  80dB
5. Supply voltage rejection:  45dB
6. Output power: up to 50 watts
7. Short circuit and thermal protection

2N5551 Amplifier NPN transistor pack of 20pcs

Specification:-

1. Transistor type  :  Amplifier NPN Transistor
2. High DC Current Gain  :  80
3. Continuous Collector current  :  600mA
4. Collector-Emitter voltage  :  160 V
5. Collector-Base voltage  :  180V
6. Emitter Base Voltage  :  6V
7. Transition Frequency  :  100MHz

SC458G B50K 75mm Dual channel linear slide potentiometer pack of 1 pcs

Specification

1. Potentiometer type: slide
2. Maximum resistance: 50KΩ
3. Total length of the pot: 75mm
4. Travel length: 60mm
5. Power rating: 0.5W
6. Element material: carbon
7. Actuator type: Lever
8. Tolerance: 20%

MQ2 Methane, Butane, LPG and smoke detection sensor pack of 1pcs

Specification

1. High-quality aluminium oxide body
2. Operating voltage  :  5V
3. Sensing resistance  :  10kΩ to 30KΩ
4. Load resistance  :  20kΩ (Adjustable)
5. Heating consumption  :  lower than 800mW
6. Concentration scope : 200 to 10,000ppm

INA125P Instrumentation amplifier with precision voltage reference DIP 16 pin IC

Specification

1. Wide supply range:-
   • Single supply voltage : 2.7V to 36V
   • Dual supply voltage : 1.3v to 18V
2. Number of amplifier : 2
3. Input offset voltage :  250µV
4. Bandwidth : 150KHz
5. Slew rate :  0.02V/µs
6. Amplifier output : single-ended

0.68μF 684J 400V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V
2. Dimensions = 25.0mm(W)
3. Dimensions = 20.0mm(H)
4. Dimensions = 13.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω