ALL ELECTRONICS COMPONENTS

SMAJ170 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 189.00V
3. Maximum Breakdown voltage : 231V
4. Stand-off voltage : 170.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 0.99A
7. Maximum clamping voltage : 304.0V
8. Power dissipation : 400W

SMA, SMAJ17A, 17.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 17.0v
3. Maximum average rectified current : 10.9A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 27.6V

MM1Z2B4 500mW ,SOD-123 Packaging Diodes Pack of 5pcs

Specification:

• Power Dissipation : 500mW
• Nominal Zener Voltage : 2.4V
• Minimum Zener voltage : 2.352V
• Maximum Zener voltage : 2.448V
• Maximum Reverse Leakage Current : 120µa
• Package : SOD-123

8.2K Ohm (Ω) 1 Watt ±5% Tolerance 8.2K MR Ω ohm MF Through Hole Resistors Axial Lead Pack of 1000

Specifications:-

• Resistance: 8.2K ohm
• Tolerance: 5%
• Resistor type: carbon film
• Power rating: 1W
• Max. operating voltage: 180V to 240V

CD4543 BCD to 7 Segment Decoder IC (DIP-16 Package)

Specification:-

• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V 

ADE7757 Energy Metering SMD IC with Integrated Oscillator

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• On-Chip Creep Protection (No Load Threshold)
• Single 5 V Supply, Low Power (20 mW Typical)
• High Accuracy, Supposes 50 Hz/60 Hz IEC 521/IEC 61036
• Less than 0.1% Error over a Dynamic Range of 500 to 1

SA18 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 20.0 , Max(V) 24.4
• Maximum peak current : 15.5A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

P4KE350A 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 332.0 , Max(V) 368.0
• Maximum peak current : 0.83A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

P4KE120 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 108.0 , Max(V) 132.0
• Maximum peak current : 2.4A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Power dissipation :400W
• Package : DO-41

SMBJ5.0 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 6.40V
3. Maximum Breakdown voltage : 7.81V
4. Stand-off voltage : 5.0
5. Maximum reverse leakage current : 800
6. Maximum peak pulse current : 62.5A
7. Maximum clamping voltage : 9.6V
8. Power dissipation : 600W

CD4066 Quad Bilateral Switch IC (DIP-14 Package)

Specification:-

• Number of channels: 4
• Bandwidth: 40MHz
• 5-V, 10-V, and15-V Parametric Ratings
• 15-V Digital or ±7.5-V Peak-to-Peak Switching
• 100% Tested for Quiescent Current at 20-V
• Operating temperature range: -55°C to 125 °C
• Low Crosstalk Between Switches: –50 dB Typical at fis = 8 MHz, RL = 1 kΩ

MAX7221 8-Digit LED Display SMD Driver IC

Specification:-

• 10MHz Serial Interface
• Individual LED Segment Control
• Decode/No-Decode Digit Selection
• 150µA Low-Power Shutdown (Data Retained)
• Digital and Analog Brightness Control