ALL ELECTRONICS COMPONENTS

SMC(G) SMCJ100 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 100.0V
3. Maximum peak pulse current : 8.4A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 179V
6. Power dissipation : 1500W

SMBJ75 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 83.30V
3. Maximum Breakdown voltage : 102V
4. Stand-off voltage : 75.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 4.5A
7. Maximum clamping voltage : 134.0V
8. Power dissipation : 600W

3.3k ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 0603
• Resistance: 3.3M
• Tolerance:  ± 1%
• Power Rating (Watt): 1/16W
• Resistor Technology: Thick Film
• Operating Temperature: -55 °C to +155 °C

LF398 Sample and Hold Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: ±18 V
• Input voltage: ±18 V
• Power dissipation: 500 m W
• Operates from ±5-V to ±18-V Supplies
•  0.5-mV Typical Hold Step at Ch = 0.01 µF
• Logic-to-logic reference differential voltage: 7 to -30 V
• Storage temperature: -65 °C to 150 °C

74HC109 Dual J-K Positive-Edge-Triggered Flip-Flops SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• Input Clamping Current: ±20 mA
• Output Clamping Current: ±20 mA
• J and K inputs for easy D-type flip-flop
• Storage Temperature Range : −65°C to + 150°C

SMAJ45A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 50.00V
3. Maximum Breakdown voltage : 55.3V
4. Stand-off voltage : 45.0
5. Maximum reverse leakage current : 5.0µa
6. Maximum peak pulse current : 4.1A
7. Maximum clamping voltage : 72.7V
8. Power dissipation : 400W

CD4016 Quad Bilateral Switch IC (DIP-14 Package)

Specification:-

• Wide supply voltage range: 3V to 15V
• VDD Supply Voltage: −0.5V to +18V
• VIN Input Voltage: −0.5V to VDD + 0.5V
• TS Storage Temperature Range: −65°C to + 150°C
• Power Dissipation: Dual-In-Line: 700 mW
• Frequency response, switch “ON”: 40 MHz (typ.)
• Lead Temperature: 260°C

S8050 3-Pin General-Purpose NPN Transistor To-92 Package

Specification:-

• Transistor Type: NPN
• Maximum Power: 2 Watts
• Maximum DC Current Gain:  400
• Continuous Collector current: 700mA
• Base- Emitter Voltage: 5V
• Collector-Emitter Voltage:20V
• Collector-Base Voltage:30V

SM72295 Photovoltaic Full Bridge Driver SMD IC

Specification:-

• Dual Half Bridge MOSFET Drivers
• Integrated 100V bootstrap diodes
• Supply Voltage Range up to 115V DC
• Max. Junction Temperature: 150°C
• Temperature Range: -55°C to +150°C

1.5KE170A 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 162.0V
• Maximum Breakdown voltage: 179.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 6.4A
• Maximum clamping voltage: 234.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 1500W
• Package: DO-201AD

DAC0800 8-Bit Digital to Analog D/A Converter IC (DIP-16 Package)

Specification:-

• Output type: Unbuffered Current
• DAC channels: 1
• Output range: 0 to 2mA
• Settling time: 0.1µs
• High Output Compliance: −10 V to +18 V
• Wide Power Supply Range: ±4.5 V to ±18 V
• Low Power Consumption: 33 m W at ±5 V
• Operating temperature range: 0°C to 70°C

0.0033μF 332J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 5.0mm
8. Dimensions of Length : 13.0mm