ALL ELECTRONICS COMPONENTS

24C32 32K bit Serial I2C Bus EEPROM IC (DIP-8 Package)

Specification:-

• Voltage operating range: 4.5V to 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VCC +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temperature with power applied: -65°C to +125°C
• ESD protection on all pins: ≥ 4 kV
• Soldering temperature of leads (10 seconds): 300°C

IRFB4321 150V 85A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 150V
• Continuous Drain Current (Id): 85A
• Drain-Source Resistance (Rds On): 15mOhms
• Gate-Source Voltage (Vgs): 30V
• Gate Charge (Qg): 110 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 350W

MCP41010 8-Bit Digital 10K Potentiometer with SPI Interface IC

Specification:-

• Single supply operation: 2.7V – 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VDD +1.0V
• Storage temperature: -60°C to +150°C
• Ambient temp. with power applied: -60°C to +125°C
• ESD protection on all pins: ≥ 2 kV

AD737 RMS to DC Converter IC

Specification:-

• Supply Voltage: ±16.5 V
• Internal Power Dissipation: 200 mW
• Input Voltage: ±VS
• Output Short-Circuit Duration: Indefinite
• Differential Input Voltage: +VS and –VS
• Lead Temperature: 300°C
• Storage Temperature Range: −65°C to +125°C
• ESD Rating: 500V
• Low input bias current: 25 pA maximum

0.047uF 100V 0603 SMD Ceramic Capacitor Pack of 50

Specification:-

• Part no: CC0603KRX7R0BB473
• Capacitance: 0.047 uF
• Mounting Type: SMD
• Tolerance Rating: ±10 %
• Voltage Rating:  100 V
• Material: Ceramic

74HC93 4-Bit Binary Ripple Counter IC DIP-14 Package

Specification:-

• Number of pins: 14
• No. of Bits: 4
• Operating Voltage (V): 2 to 6
• Mounting Type: SMD/SMT
•  ICC category: MSI
• Operating Temperature (°C): -55°C ~ +125°C

74595 8-Bit Serial-in/Serial or Parallel-Out Shift Register SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Voltage Rating: 2.0 to 6.0 V
• Supply Voltage: – 0.5 to + 7.0
• Input voltage: – 0.5 to VCC + 0.5
• Output Voltage: – 0.5 to VCC + 0.5
• Input Current: ±20 mA
• Storage Temperature Range: 0°C to + 70°C
• Output Drive Capability: 15 LSTTL Loads

DG508 CMOS Analog Multiplexer IC

Specification:-

• Low power – SUPPLY: 10 μA
• Low charge injection – QINJ = 2 pC
• Voltages Referenced to V-: V+, GND: 44, 25V
• Current (Any terminal): 30mA
• Power Dissipation: 510 mW
• Storage Temperature: -65°C to +150°C
• Extended operate temperature range: -40 °C to +125 °C

AD736 True RMS to DC Converter IC

Specification:-

• Supply Voltage: ±16.5 V
• Internal Power Dissipation: 200 mW
• Input Voltage: ±VS
• Output Short-Circuit Duration: Indefinite
• Differential Input Voltage: +VS and –VS
• Lead Temperature: 300°C
• Storage Temperature Range: −65°C to +125°C
• Wide power supply range: +2.8 V, −3.2 V to ±16.5 V

74LS11 Triple 3-Input AND Gate IC DIP-14 Package

Specification:-

• Number of pins: 14
• Supply Voltage (VCC: 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: -65°C to +150°C

470uF 35V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 470uF
• Rated Voltage: 35V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

SMAJ90 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 100.00V
3. Maximum Breakdown voltage : 122V
4. Stand-off voltage : 90.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.9A
7. Maximum clamping voltage : 160.0V
8. Power dissipation : 400W