ALL ELECTRONICS COMPONENTS

AM26LV32 Low-Voltage High-Speed Quadruple Differential Line Receiver SMD IC

Specification:-

• Mounting: SMD
• Number of: 16 Pins
• Input Hysteresis: 50 mV Typical
• Operates From Single 3.3-V Supply
• Ultra-Low Power Dissipation: 27 mW Typical
• Switching Rates Up to 32 MHz
• 235 mW With Four Receivers at 32 MHz

P6KE39A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 37.1V
• Maximum Breakdown voltage: 41.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 11.2A
• Maximum clamping voltage: 53.9V
• Maximum Temperature Coefficient of VBR: 0.100%
• Power Dissipation: 600W
• Package: DO-15

SMAJ51 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 56.70V
3. Maximum Breakdown voltage : 69.3V
4. Stand-off voltage : 51.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.3A
7. Maximum clamping voltage : 91.1V
8. Power dissipation : 400W

ADG3245BRUZ SMD Switch IC (Package 20-TSSOP)

Specification:-

• Part No: ADG3245BRUZ
• Package: TSSOP 20 (0.173", 4.40mm)
• Mounting Type: Surface Mount 
• No. of Pins: 20Pins
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 2.3 V
• Output Current: 25mA
• Operating Temperature: - 40°C to +85°C 
• Logic Type: Level Translator Bus Switch

7D471K 7mm Metal Oxide Varistor (MOV) Pack of 5

Specification:-

• Varistor Voltage: 470V
• Maximum AC Voltage Rating: 300V
• Maximum DC Voltage Rating: 517V
• Dimensions: 7 (Dia.) x 4mm
• Maximum Surge Current: 1.2 KA

IR2101 High and Low Side Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply Voltage: -0.3 to VSS+0.3 V

1uF 0603 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 0603
• Capacitance : 1uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

ACPL-782T-000E Isolation Amplifier IC 8-PDIP

Specification:-

• Package: PDIP-8 (0.300", 7.62mm) 
• No. of Pins: 8-Pins
• Supply Voltage : 5.5 V
• Maximum Power Dissipation: 600 mW
• Number of Channels per Chip: 1 Channel
• Operating Temperature: -40°C ~ 125°C

80C51BH-1 Microcontroller IC 8-Bit MROM 8051 CPU 16MHz CMOS 40-PDIP

Specification:-

• Package: PDIP40 (0.600", 15.24mm)
• Microcontroller Bit:  8-Bit
• MROM, CPU Architecture: 8051 CPU
• Clock Speed: 16 MHz
• Technology: CMOS

74HC574 Tri State Octal D-Type Flip-Flop IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

10uF 35V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 10uF
• Rated Voltage: 35V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

0.033μF 333J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 7.3mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0-10.0mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω