ALL ELECTRONICS COMPONENTS

74LS73 Dual JK Flip-Flop with Clear IC DIP-14 Package

Specification:-

• Number of pins: 14
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C 
• Storage temperature range: –65°C to +150°C

74LS109 Dual J-K Positive Edge-Triggered Flip-Flop IC DIP-16 Package

Specification:-

• Number of pins: 16
• IC Type: Flip Flop
• No. of Bits: 2
• Input Voltage (VCC: 4.75 to 5.25V
• Propagation delay (Max): 20ns
• Operating free-air temperature range: 0°C to +70°C

CD4011 Quad 2-Input NAND Gate IC (DIP-14 Package)

Specification:-

• Voltage: 3V to 18V
• Input type: Standard CMOS
• Output type: Push-Pull
• Data rate (Max): 8 (Mbps)
• Noise margin (over full package temperature range:
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• Operating Temperature Range: -55°C to + 125°C

14.318Mhz (SMD) Crystal Oscillator HC49/US Package Pack of 5

Specifications :-

• Frequency Range: 14.318Mhz 
• Tolerance(%): 30
• Operating Temperature Range: -10C to +60C
• Storage condition (Deg C): -20 to 70
• Length (mm): 11.4
• Width (mm): 4.7
• Height (mm): 3

LF356 JFET Input Op-Amplifier IC (DIP-8 Package)

Specification:-

• Supply Voltage: ±18 V
• Input voltage: ±16 V
• Differential input voltage: ±30 V
• Low Input Bias Current: 30 pA
• Low Input Offset Current: 3 pA
•  High Input Impedance: 1012 Ω
• Operating temperature: -40 °C to 125 °C
• Storage temperature: -65 °C to 150 °C

SMC(G) SMCJ16 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 16.0V
3. Maximum peak pulse current : 52.1A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 28.8V
6. Power dissipation : 1500W

SMBJ110 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 122.00V
3. Maximum Breakdown voltage : 149V
4. Stand-off voltage : 110.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.1A
7. Maximum clamping voltage : 196.0V
8. Power dissipation : 600W

2.4 ohm 1206 High Power SMD Thick Film chip Resistor Pack of 50

Specification:-

• Case type: 1206
• Resistance: 2.4 ohm
• Tolerance:  ± 5%
• Power rating: 1/8 watts
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

74LS05 Hex Inverters with Open-Collector SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: 4.75 to + 5.25V
• Output Current: 8mA
• Operating Temperature: 0°C to 70°C
• Six Independent INVERT Gates
• Standard TTL Switching Voltages

IRF5305 55V 31A P-Channel HEXFET Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: P-Channel
• Drain-Source Breakdown Voltage (Vds): -55V
• Continuous Drain Current (Id): -31A
• Drain-Source Resistance (Rds On): 60mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 63 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 110W

100Pcs 50V 9mm monolithic ceramic capacitor 0.33UF 334

Specification

1. Part no.  CT4-0805B34K500
2. CAP: 0.33UF
3. TOL: 10%
4. W.V: 50V
5. Length: 9MM

CD40175 Quad D-Type FlipFlop IC (DIP-16 Package)

Specification:-

• DC Supply Voltage Range, (VDD): -0.5V to +20V
• Input Voltage Range, All Inputs: -0.5V to VDD +0.5V
• Operating Temperature Range: -55°C to +125°C
• DC Input Current, Any One Input: ±10mA
• Storage Temperature Range (TSTG): -65°C to +150°C
• Lead Temperature (During Soldering): +265°C