ALL ELECTRONICS COMPONENTS

FDP090N10 100V 75A N-Channel Power Trench MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 100V
• Continuous Drain Current (Id): 75A
• Drain-Source Resistance (Rds On): 9mOhms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 116 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 208W

1.6M ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 0603
• Resistance: 1.6M
• Tolerance:  ± 5%
• Power Rating (Watt): 0.25W, 1/4W
• Operating Temperature: -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

1.5K ohm 1206 High Power SMD Thick Film Chip Resistor Pack of 5000

Specification:-

• Case type: 1206
• Resistance: 1.5K ohm
• Tolerance:  ± 5%
• Power rating: 1/8 watts
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

SMAJ120 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 133.00V
3. Maximum Breakdown voltage : 163V
4. Stand-off voltage : 120.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.4A
7. Maximum clamping voltage : 214.0V
8. Power dissipation : 400W

UPC4570 Low Noise Dual Ultra Operational Amplifier SMDIC

Specification:-

• IC Name: UPC4570IC
• Package/Case: SMD-8
• Supply Voltage Range: ±3V to ±15V
• Input Offset Voltage: Typically 0.5 mV.
• Input Bias Current: Typically 50 nA.
• Output Drive Capability: Can drive loads down to 600Ω.

5KP26A 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 28.9V
• Maximum Breakdown voltage: 31.9V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 119A
• Maximum clamping voltage: 42.1V
• Power Dissipation: 5000W
• Package: R-6

OP295GS General Purpose Dual Operational Amplifier SMD IC 8-SOIC

Specification:-

• Package: 8-SOIC (0.154", 3.90mm)
• No. of Pins: 8Pins
• No. of Channels: 2 Channels
• Output Type: Rail-to-Rail
• Input Offset Voltage: 30µV
• Input Bias Current: 8nA
• Gain Bandwidth Product: 85kHz
• Supply Voltage Range: 3V to 36V
• Operating Temperature: -40°C ~ 125°C

A2611 AVAGO DIP-8 Analog IC

Specification:-

• Mounting: DIP
• Number of: 8 Pins
• Temperature Range: 0°C to + 70°C
• High-Speed Operation
• DIP-8 package configuration

74LS244 Octal 3-State Buffer/Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: –65°C to +150°C
• Typical enable/disable times 18 ns

4.7uF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 4.7uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

2.2uF 50V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 2.2uF
• Rated Voltage: 50V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

CNY17-2 Phototransistor Optocoupler IC DIP-6 Package

Specification:-

• IC Name: CNY17
• Package: DIP
• Size: 3.81X8.7X6.5mm
• Voltage Rating:70V Emitter, 0.4V Collector, 70V Collector-Emitter