ALL ELECTRONICS COMPONENTS

GS-SH-209T DPDT 9V 2A Through Hole 8-Pin Telecom Relay

Specification:-

• Package: DIP 8-Pin
• Type: DPDT (Double Pole Double Throw) relay
• Coil Operate Voltage (DC):  6.75 V
• Coil Release Voltage (DC): 0.9 V
• Coil Resistance : 405 Ω
• Coil Voltage: (DC)-Max 13.5 V
• Coil Voltage: No. 9 V
• Contact Resistance 100 mΩ
• Contact Voltage: (AC)-Max 120 V
• Contact Voltage: (DC)-Max 24 V

UC3706 Dual Output Mosfet Driver SMD IC

Specification:-

• Mounting Style: SMD/SMT
• Dual, 1.5A Totem Pole Outputs
• Voltage: 5 to 40V
• 16-Pin Dual-In-Line Package
• 20-Pin Surface Mount Package
• 40nsec Rise and Fall into 1000pF

A2611 AVAGO DIP-8 Analog IC

Specification:-

• Mounting: DIP
• Number of: 8 Pins
• Temperature Range: 0°C to + 70°C
• High-Speed Operation
• DIP-8 package configuration

74HC4040 12-Stage Binary Ripple Counter SMD IC

Specification:-

• Mounting: SMD
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• Supply Current: ± 50 mA
• DC Output Current, per pin: ± 25 mA
• DC Input Current, per Pin: ± 20 mA
• Operating Temperature: 65°C to 150°C

74AC00SCX Logic IC NAND Gate IC 4 Channel 14-SOIC

Specification:- 

• Package: SOIC14 (0.154", 3.90mm)
• Logic Function: NAND
• Number of Output Lines: 4 Output
• Low Level Output Current: 24 mA
• High Level Output Current: - 24 mA
• Propagation Delay Time: 6 ns
• Supply Voltage - Min: 2 V
• Supply Voltage - Max: 6 V

2.2nF 2200pF 400V DIP Ceramic Capacitor (222)

Specification:-

• Capacitor Type: Ceramic
• Tolerance: ±20%
• Voltage Rating: 400V
• Lead pitch: 5 ~ 6.5 mm
• Capacitance Value: 2200pF
• Temperature Range: -25 ~ 125°C

ATTINY26L-8PU Microcontroller IC Microchip 8-Bit (20-PDIP)

Specification:-

• Package: PDIP-20 (0.300", 7.62mm) 
• No. of Pins: 20Pins
• IC Mounting: Surface Mount
• Supply Voltage Min: 2.7V
• Supply Voltage Max: 5.5V
• Operating Frequency Max: 8MHz
• Program Memory Size: 2KB (1K x 16)
• Operating Temperature: -40°C to 85°C

PL2303HX Full Duplex RS-485 Transceiver SMD IC

Specification:-

• Two general-purpose I/O (GPIO) pins.
• Supports RS232-like Serial Interface.
• Two general-purpose I/O (GPIO) pins.
• Configurable 512-byte bi-directional data buffer.
• On-Chip USB 1.1 transceiver, 5V ~ 3.3V regulator, and 12 MHz crystal oscillator.

IRF644 250V 14A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 250V
• Continuous Drain Current (Id): 14A
• Drain-Source Resistance (Rds On): 0.28 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 68 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 125W

100Pcs 50V 9mm monolithic ceramic capacitor 0.33UF 334

Specification

1. Part no.  CT4-0805B34K500
2. CAP: 0.33UF
3. TOL: 10%
4. W.V: 50V
5. Length: 9MM

20nF 1206 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1206
• Capacitance : 20nF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

FT232RL FTDI USB to Serial Adapter Module | USB to TTL Programming Converter for DIY Projects

Specification:-

• Chipset: FT232RL
• Input Interface: USB
• Output Interface: TTL UART (TX, RX, GND, VCC)
• Operating Voltage: 5V via USB
• Logic Level: 3.3V / 5V selectable
• Data Transfer Rate: Up to 3 Mbps
• Connector Type: USB Type-A / Micro-USB (model dependent)
• Operating System Support: Windows, Linux, Mac OS