ALL ELECTRONICS COMPONENTS

20 mm Reed switch magnetic sensor pack of 2pcs

Specification

1. Hard glass protection
2. Small, cheap, and easily available
3. Current Rating :  0.1a
4. Power/Voltage :  30v dc
5. Switch Configuration :  SPST
6. Package includes : 5 pieces

82uf 450V Aluminum Electrolytic Capacitors (22 x 30mm) Pack of 5pcs

Specification

• Rating Voltage = 450V
• Material = Aluminum
• Capacitor Size = 22 x 30 mm
  
• Ripple current = 0.64
  
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for "Endurance"

0.33μF 334J 400V CBB22 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 400V
2. Dimensions = 25.0mm(W)
3. Dimensions = 17.0mm(H)
4. Dimensions = 10.0mm(T)
5. Dimensions = 20.0mm(P)
6. Standard  =  GB 10190 (IEC 384-16)
7. Capacitance Tolerance = ±5%(J), ±10%(K),
8. Insulation Resistance = > 25000M Ω 

2.2μF 225J 400V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 400V
• Dmax = 16.5mm
• Lmax = 33.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

TDA7389 4 Channel Quad bridge car radio amplifier 27 pins IC pack of 50pcs

Specification

1. Operating supply voltage: 18V
2. Output peak current: 4.5A
3. Max output power: 45 watt
4. Power dissipation: 80 watt
5. Output offset voltage: 80mV
6. Voltage gain: 27dB
7. Number of channels: 4

HT12D Decoder DIP 18 pin IC for remote control system pack of 2pcs

Specification

1. Function : Decoding
2. Number of pin : 18
3. Operating voltage : 5V
4. Low standby current : 4µA at 5V
5. Built-in oscillator
6. Low power and high noise immunity

3V to 24V Cylindrical Piezoelectric passives continuous beep buzzers pack of 100pcs

Specifications:-

1. Operating voltage range : 3V to 24V
2. Rated current : 3A
3. Response frequency : 2048Hz
4. Sound pressure : 95db/10cm
5. Two electric wires for connection
6. Hard plastic body

HT12E Encoder DIP 18 pin IC for remote control system pack of 2pcs

Specification

1. Function: DIP Encoder IC
2. Number of pin: 18
3. Operating voltage range: 2.4V to 12V
4. Data code has a positive polarity
5. Low standby current: 0.1µA at 5V
6. Built-in oscillator
7. Low power and high noise immunity

TDA2003 10W Car radio audio amplifier DIP 7 pins IC pack of 10pcs

Specifications

1. Operating voltage:  8V to 18V
2. Power dissipation: 20W
3. Voltage gain : 80dB
4. Supply voltage rejection :  36dB
5. Short circuit protection
6. Thermal protection

DO-15, TPA240 240V General Purpose Rectifiers Diode pack of 5pcs

Specification

1. Case:  DO-15
2. Maximum respective peak reverse voltage : 240v
3. Maximum average rectified current : 50A
4. Maxim reverse current : 2.0µA
5. Maxim forward voltage : 216V

50Pcs 1.2k Ohm (Ω) 1/2w (0.50 watt) ±5% Tolerance 1.2k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 1.2K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/2Watt
5. Maximum working voltage: 250V

Light dependent resistor sensors 5 mm (LDR) GL5528 pack of 50pcs

Specification

1. Can be used to sense Light
2. Easy to use on Breadboard or Perf Board
3. Small, cheap and easily available
4. Max. voltage  :  150V
5. Max. power  :  90W
6. Package includes : 50 pieces