ALL ELECTRONICS COMPONENTS

Electronic Spices 5000Pcs 1k Ohm (Ω) 1/4 (0.25 watt) ±5% Tolerance 1k MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance: 1K ohm (Ω)
2. Resistor type : carbon film resistor
3. Tolerance: 5%
4. Power rating: 1/4Watt
5. Maximum working voltage: 250V

TSOP38238 Infrared receiver 3 pin pack of 5pcs

Specification:-

1. Operating Voltage  :  2.5V to 5.5V
2. Operating Current  :  350μA
3. Output Current  :  5mA
4. Carrier Frequency  :  40 kHz
5. Transmission Distance  :  40 m
6. Package includes : 5 pieces

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pins IC pack of 10pcs

Specification

1. Supply voltage : 8.5V to 16V
2. Phase slew rate : 20V/ns
3. Operating current : 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

XTR105P 4 to 20mA Current transmitter with Sensor excitation and linearization DIP 14 pin IC

Specification

1. Supply voltage range : 7.5V to 36V
2. IC type : Current transmitter
3. Current supply : 20mA
4. Interface : 3 wire
5. Two precision current source
6. Low offset drift
7. Low output current noise

180uf / 400V Aluminum Electrolytic Capacitors (35 x 25)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 35 x 25mm
4. Voltage Rating :  400V
5. Capacitance: 180uf
6. Capacitance tolerance : ±20%(M)

GL-12 830 points Long size Solderless breadboard for prototype circuit pack of 5pcs

Specification

1. Tie points : 830
2. Dimensions : 175mm Length x 67mm breadth
3. Mounting holes : M2
4. Accepts 20-29 AWG wire sizes
5. Use to make the base of the prototype circuit
6. Reusable, solderless, and easy to use

10uf / 450V Aluminum Electrolytic Capacitors (13 X 20)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 13 X 20mm
4. Voltage Rating :  450V
5. Capacitance: 10uf
6. Capacitance tolerance : ±20%(M)

Blue color Potentiometer knob Rotary switch caps pack of 50pcs

Specification:

1. Hight:                    15.6mm
2. diameter:               15.9mm
3. Material:                 plastic
4. Indicator colour:     white
5. Body colour:           Black & Blue

TO-220 7824, 3-Terminal Positive Voltage Regulator IC pack of 5pcs

Specification

1. Output Current Up To 1.5 A
2. Input Voltage 23V To 25V
3. Thermal Overload Protection Short Circuit Protection
4. 2 % Output Voltage Tolerance
5. Output Transition SOA Protection

4 x 4 inch (10.3m x 10.3cm) Copper clad single side 1mm pitch printed circuit boards or PCB pack of 10pcs

Specification

1. Copper clad coating PCB
2. Dimension : 4 x 4 inch (10.3cm x 10.3cm)
3. Board thickness : 1.6 mm
4. Pitch size : 1 mm
5. Circuit printing : single side
6. High wear and tear properties
7. Excellent heat resistance

400 points Half size Solderless breadboard for prototype circuit pack of 5pcs

Specification

1. Tie points : 400
2. Dimensions : 82mm Length x 55mm breadth
3. Mounting holes : M2
4. Accepts 20-29 AWG wire sizes
5. Use to make the base of the prototype circuit
6. Reusable, solderless, and easy to use

D882 NPN Transistor 30V (SOT-89 Package) Pack of 10

Specification:-

• Polarity: NPN
• Type Designator: D882
• Maximum Collector-Base Voltage |Vcb|: 40 V
• Maximum Collector-Emitter Voltage |Vce|: 30 V
• Maximum Emitter-Base Voltage |Veb|: 6 V
• Maximum Collector Current |Ic max|: 3 A
• Max. Operating Junction Temperature (Tj): 150 °C
• Transition Frequency (ft): 50 MHz
• Forward Current Transfer Ratio (hFE), MIN: 60