NEW ARRIVALS

C-Type USB Female Socket with 2-Pin 2.5mm JST Wire Connector (25.5cm)

Specification:-

• Connector Type: USB
• Cable Type: USB
• Current: 3A
• Wire length: approx. 25.5 cm
• 2-Pin 2.5mm JST Connector
• Compatible Devices: Charging Adapter

12V 2A Adapter with 5.5mm Female BNC Connector, Ideal for CCTV & LED DIY Projects

Specification:

1. Input voltage: AC 100–240V
2. Output voltage: 12V
3. Power rating: 2A
4. Color: Black
5. Max. frequency range: 50 to 60 Hz
6. Over-current, overload, and short circuit protection
7. Type: Power Connector
8. Connector Type - 5.5mm Female BNC Screw-Type Connector

12V DC Brushless Exhaust Blower Fan | Cooling & Air Ventilation Fan

Specification

• Model: DW127530-SL1
• Motor Type: Brushless DC Motor
• Rated Voltage: 12V DC
• Operating Voltage: 9V – 14V DC
• Current Rating: ~0.15A
• Connector Type: 2-Pin JST Connector
• Cable Length: 22cm 
• Fan dimension: 75x73x30 mm (approx.)
• Low power consumption

B50k Ohm 5-pin Composition Rotary Taper Potentiometer Green/Silver Tone

Specification:-

• Type: Single Linear (Type B)
• Mounting Style: Through Hole
• PIN numbers: 5
• Shaft Diameter: 6 mm
• Shaft Length: 14 mm
• Resistance value: B50K Ohm
• Color: Green, Silver Tone

12V 2.4W Cool White COB LED | Cars Interior Lights | Universal Car Roof & Cabin Lights Pack of 20

Specification:

• Operating voltage: 12V
• Emerging color: White
• Power rating: 2.4 watts
• LED junction temperature: 125°C
• Color Temperature: 6500K
• Low Battery Consumption

FT232RL FTDI USB to Serial Adapter Module | USB to TTL Programming Converter for DIY Projects

Specification:-

• Chipset: FT232RL
• Input Interface: USB
• Output Interface: TTL UART (TX, RX, GND, VCC)
• Operating Voltage: 5V via USB
• Logic Level: 3.3V / 5V selectable
• Data Transfer Rate: Up to 3 Mbps
• Connector Type: USB Type-A / Micro-USB (model dependent)
• Operating System Support: Windows, Linux, Mac OS

Nano Starter Kit | Compatible with Arduino IDE | Beginner DIY Electronics Kit (236 Item)

Specification:-

• Nano R3 development board
• 830-Point Solderless Breadboard
• HC-SR04 Ultrasonic Module
• 5mm LEDs: Assorted Color LEDs
• Switches & Controls: Push Buttons, Potentiometer
• Displays: 7-Segment Display, LED Bar Graph
• Transistors & Diodes: 2N2222 NPN Transistor, 1N4007 Diode
• Motor Driver & ICs: L293D Motor Driver, 74HC595 Shift Register

Kit Included:

1x Nano Microcontroller | 1x 830 Point Breadboard | 1x HC SRO4 | 5x Push Button | 1x Potentiometer | 2x 144007 Diode | 1x Photoresistor | 1x L2930 Motor Driver | 1x IC 74HC595 | 4x 2N2222 NPN Transistor | 25x LEDS | 1x USB Cable | 1x Fan  | 1x DC Motor | 1x 7 Segment 4 Digit | 1x Bar Graph | 1x Relay | 1x IR Receiver | 1x Passive Buzzer | 1x RGB | 1x Thermistor | 40x Jumper Pins Male to Male  | 40x Male to Female Wires | 1x IR Remote | 100x 1/4-watt Resistors (220K, 330K, 1K, 22K, 15K, 10K, 100K, 1M, 6.8K, 47K)

MKP-X2 0.68uf 310VAC Metallized Polypropylene Film Capacitors Pack of 5

Specification:

• Rated voltage : 310VAC
• Dimensions = 17.8mm(W)
• Dimensions = 13.8mm(H)
• Dimensions = 8.2mm(T)
• Capacitance Range 0.0022 ~ 2.2μF
• Capacitance Tolerance = ±10%(K)
• Operating Temperature: -40°C~ +110°C

1uf / 100V Aluminum Electrolytic Capacitors (5 X 10.8mm) Pack of 5

Specification:-

• Terminals: 2
• Material: Aluminum 
• Capacitor Size: 5 X 10.8mm
• Voltage Rating: 100V
• Capacitance: 1 uf
• Capacitance tolerance: ±20% (M)

1uf / 250V Aluminum Electrolytic Capacitors (6.5 X 11.5mm) Pack of 5

Specification:-

• Terminals: 2
• Material: Aluminum 
• Capacitor Size: 6.5 X 11.5mm
• Voltage Rating: 250V
• Capacitance: 1 uf
• Capacitance tolerance: ±20% (M)

Combo of BO Motor | Rubber Wheels | 4CH Transmitter & Battery Holder (11 Item)

Specification:-

• 4CH RC remote control
• Diameter of the wheel : 60mm
• BO gear motor compatible
• High-quality material build
• AA 4 cell battery holder
• AA 2 cell battery holder
• Transmitter operating voltage: 3.7-9V (HW Battery)
• Transmitter Range: 12-15 (approx)

6 x 6 x 5mm Tactile Push Button Switch 2 Pin Pack of 20

Specification:-

• Type: Through-hole design.
• Shaft Shape: Square
• Number of pins: 2
• Mode of Operation:  Tactile momentary
• Power Rating:  MAX 50mA 12V DC
• Insulation Resistance:  100M ohm (Ω)