SENSORS & MODULES

TPA3110 30W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Chip name:  TPA3110
2. Working Voltage:  8V to 26 V DC
3. Output Power  :  30W
4. Applicable Speaker Impedance  :  8 Ω is perfect but 4/6 is also good
5. Single-channel digital power amplifier
6. Sound quality is also very good

GD4142 Dual USB 5V 1A DC to DC step up booster power bank charging modules pack of 10pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

PAM8406 5Wx2 dual channel stereo Mini digital amplifier module with volume control preset pack of 1pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

L298N 1.5A 2V DC Motor Drive Controller Board PWM Speed H-Bridge Stepper Module

Specification

• Module supply voltage: DC 2V-10V
• Signal input voltage: DC 1.8-7V
• Single working current: 1.5A
• Peak current up to 2.5A
• Low standby current (less than 0.1uA)

PAM8610 10W+10W Dual channel stereo audio amplifier board modules pack of 50pcs

Specification

1. Dual-channel audio amplifier
2. Working voltage:  12V
3. Output power  :  10W+10W
4. Chip name  :  PAM8610
5. Efficiency  :  90%
6.  Frequency response  :  20Hz to 50KHz

TPA3118 60W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Operating Voltage:  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

ESP-WROOM-32E 4M WiFi and Bluetooth Module

Specification:-

• WiFi: 802.11 b/g/n
• SPI Flash: 4 MB
• Operating voltage: 2.2-3.6V
• Xtensa: 32-bit LX6 microprocessors
• Wi-Fi mode: Station/SoftAP /SoftAP + station/P2P

12V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

TP4056 5V 1A 18650 Lithium Battery Charging modules (C-TYPE) pack of 50pcs

Specification:-

1. Input voltage  :  5V
2. Charging cut-off voltage  :  4.2V
3. Maximum charging current  :  1000mA
4. Battery over-discharge protection voltage  :  2.5V
5. Battery overcurrent protection current  :  3

DC 12V 1 Channel RF Transmitter Remote Controls with Wireless Remote Control Switch

Specifications:-

• Voltage: DC12V
• Current Rating: 10 Amps
• Wireless control and easy to install.
• Control Lights, Motors, Fans, electrically operated.
• Material: Plastic + Metal.
• Wiring type: fixed terminal.
• Push the remote button, LED flashes on and off.

ESP8266 Wireless WiFi Transceiver Module

Specification:-

• 1MB Flash Memory
• Wi-Fi Direct (P2P), soft-AP
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW
• Integrated low power 32-bit CPU could be used as an application processor

ACS712 - 10A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs an analog voltage
• Scale factor : 150mV/Amp