SENSORS & MODULES

DC 12V to 60V 8A Automatic Led Infrared PIR Motion Detector Sensor Switch

Specification:-

• Actuator Type:  Sensor
• Voltage: DC 12V-60V 
• Output Current:8V
• Operation Mode: ON-OFF
• Output: 1 Channel

TPA3118 60W Mono (single) channel digital power amplifier modules pack of 10pcs

Specification

1. Operating Voltage:  4.5V to 24V DC
2. Multiple Switching Frequencies
3. Short circuit protection
4. Stereo and Mono Mode
5. Master and Slave Synchronization
6.  Single-Filter Mono Configuration

OV7670 Camera Image sensor module

Specifications:-

1. Photosensitive Array: 640 x 480.
2. IO Voltage: 2.5V to 3.0V.
3. Operating Power: 60mW/15fpsVGAYUV.
4. Sleeping Mode: <20μA
5. Lens Size: 1/6″.
6. Vision Angle: 25 degrees.
7. Max. Frame Rate: 30fps VGA.
8. Electronic Exposure: 1 to 510 row.
9. Pixel Coverage: 3.6μm x 3.6μm.
10. Duck Current: 12 mV/s at 60℃.

Decoder Board Audio Wireless Bluetooth Module Diy Stereo board with support in bluetooth FM,USB,SD-CARD Slot , AUX & TF

Specification

• Connector Type : Bluetooth
• Audio Output Type : Speakers
• Power source : DC
• Material : Plastic
• Dimension : 97 x 16 mm

0.91 Inch 128 x 32 Blue OLED Display Module with I2C/IIC Serial Interface

Specification:-

• Driving IC: SSD1306
• Operating Voltage: 3.3-5V
• Resolution: 128×32 pixels
• Text Color: Blue
• Communication Interface: I2C

Pin:

• GND: Power Ground
• VCC: Power + (DC 3.3 ~5v)
• SCL: Clock Line
• SDA: Data Line

ACS712 - 10A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs an analog voltage
• Scale factor : 150mV/Amp

ESP8266 Wireless WiFi Transceiver Module

Specification:-

• 1MB Flash Memory
• Wi-Fi Direct (P2P), soft-AP
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW
• Integrated low power 32-bit CPU could be used as an application processor

MAX485 TTL to RS485 Long range converter module

Specifications:-

1. IC chip : MAX485
2. Operating voltage : 5V DC
3. Slew-rate limited transceiver
4. Low power consumption
5. Convenient RS-485 communication wiring
6. Multiple Units can be connected

U-BLOX NEO-6M GPS Module with Flight Controller EPROM

Specification:-

• Model Name: NEO 6M
• Chipset: U-BLOX NEO-6M
• Power Supply: 3.3V to 5V DC
• Current Consumption: Approx. 45mA
• EEPROM: Onboard, for storing configurations

L293D 4-Channel DC Motor Driver Shield for Arduino

Specification:-

• 2 connections for 5V
• 4-way PWM speed regulation
• Arduino Compatibility
• This is a commonly used DC motor drive module
• The pins are made for Arduino-compatible

1S 3A 3.7V 18650 Li-ion Lithium battery protection and charger BMS modules JH8675 pack of 10pcs

Specification:-

1. Brand new and reliable product
2. Overcharge release voltage : 4.23±0.05V
3. Overcharging voltage range : 4.25±0.05V
4. Over-discharge voltage range : 2.54±0.1V
5. Over-current detection current : 1A to 3A
6. Low current consumption.
7. Stable performance.

Coil spring switch, a multi-functional capacitive touch sensor switch, and an LED dimmer control switch

Specification

•  Input voltage: 3.7V-24v
• Output voltage: 3.7V-24V
• Standby current: 10-15mA
• Standby power consumption: 0.01W
•  Load power: 72W
•  Load current: 3A
• Working temperature: -25℃-85℃