IC

JRC4558D monolithic dual operational amplifier DIP 8 pins IC pack of 10pcs

Specification

1. Dual operational amplifier IC
2. High performance
3. Supply voltage range :  5V to 15V
4. Bandwidth  :  3MHz
5. No. of pins :  8
6. Operating temperature max :  70°C
7. Slew rate :  1.7 V/µs

LM3915N IC – LED Dot/Bar Display Driver IC

Specification

• Internal Voltage Reference from 1.2V to 12V 
• Operates with a Single Supply of 3V to 25V
• Storage Temperature Range: -55°C to 150°C
• Divider Voltage: -100mV to V+
• Voltage on Output Drivers: 25V

2902N Single supply quad operational amplifier DIP 14 pin IC pack of 2pcs

Specification

1. Single supply
2. High output voltage
3. Supply voltage:  16V to 32V
4. Power dissipation: 300mW
5. Number of pins: 14
6. Slew rate: 0.5V/μs
7. low operating voltage: 1mA

TOP246YN Extended power Flexible design, Eco-Smart, integrated off-line switcher 6 pin IC

Specification

1. Input supply voltage AC: 85V to 265V
2. Switching frequency: 66kHz - 132kHz
3. Output voltage : 12V
4. Operating supply current : 1.6mA
5. Drain voltage : 0.3V to 700V
6. Drain peak current : 4.32A
7. Type : Off line convertor
8. Extended power range
9. Wide duty cycle

TDA7388 4 Channel Quad bridge car radio amplifier 25 pins IC pack of 10pcs

Specification

1. Operating supply voltage: 18V
2. Output peak current: 4.5A
3. Output power: 41 watt
4. Power dissipation: 80 watt
5. Output offset voltage: 80mV
6. Voltage gain: 27dB
7. Number of channels: 4

CD4060 14 stage binary ripple counter 16 pin IC pack of 2pcs

Specification

1. 14-bit Binary counter or Divider IC
2. Counting range :  0 to 16383 (In decimal)
3. Operating voltage:  3V to 18V
4. Number of pins: 16
5. Maximum clock frequency: 30MHz at 15V
6. Medium speed operation :  8MHz at VDD = 10V

LM386 Low power audio frequency amplifier 8 pins IC pack of 10pcs

Specification

1. Low-power audio frequency amplifier IC
2. Supply voltage: 4V to 15V
3. Quiescent power :  24mW at 6V
4. Analog input voltage :  0.4V
5. Voltage Gain :  20 to 200 (26dB to 46dB)
6. Speaker impedance :  4Ω
7. Short circuit protection outputs

TL074CN Low noise JFET Quad operation amplifier DIP 14 pin IC pack of 2pcs

Specification

1. Wide power supply Range
   1. Singe supply:  10V to 30V
   2. Dual supply: ±5V to ±15V
2. Number of amplifiers: 4
3. Gain bandwidth: 3MHz
4. Current input bias: 65pA
5. Voltage input offset: 3mV

34063API (608AY) DC to DC convertor DIP 8 pin IC

Specification

• Operation from 3.0 V to 40 V Input
• Low Standby Current 
• Current Limiting 
• Output Switch Current to 1.5 A 
• Output Voltage Adjustable
•  Frequency Operation to 100 kHz 
•  Precision 2% Reference

TDA7294 100 watts Audio power amplifier 15 pins IC pack of 10pcs

Specification

1. Audio power amplifier
2. Supply voltage: 50 V
3. Output peak current : 10 A
4. Operating ambient temperature range : 0 to 70 °C
5. Open-loop voltage gain :  80 dB
6. Output power : up to 100 watts
7. Short circuit and thermal protection

LM311 Differential comparator op-amp DIP 8 pin IC pack of 2pcs

Specification

1. Wide power supply Range
   1. Singe supply:  5V to 30V
   2. Dual supply : ±2.5V to ±15V
2. Maximum current : 7.5mA
3. Single supply for two op-amps enables reliable operation
4. Capable of driving load up to 50V and 50 mA

CV203 10W Car radio audio amplifier 5 pins IC pack of 10pcs

Specifications

1. Operating voltage:  8V to 18V
2. Power dissipation: 20W
3. Voltage gain: 80dB
4. Supply voltage rejection:  36dB
5. Short circuit protection
6. Thermal protection