ALL ELECTRONICS COMPONENTS

0.0068μF 682J 100V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 100V
• Dimensions = 11.0mm(W)
• Dimensions = 10.0mm(H)
• Dimensions = 6.5mm(T)
• Dimensions = 5.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

24C02 2K bit Serial I2C Bus EEPROM IC DIP-8 Package

Specification:-

• Read current 1 mA, max.
• Single-Supply with Operation from: 4.5V to 5.5V
• All inputs and outputs w.r.t. VSS: -0.6V to VCC +1.0V
• Storage temperature: -65°C to +150°C
• Ambient temperature with power applied: 40°C to +125°C
• ESD protection on all pins: ≥ 4 kV

SMA, SS28 80V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 80v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.85V

0.22μF 224J 630V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 630V
• Dmax = 11.0mm
• Lmax = 28.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

1N4934 100V ,DO-41 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 200ns
• Package : DO-41

0.012μF 123J 250VAC CBB62 Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 250VAC
• Dimensions = 14.0mm(W)
• Dimensions = 12.5mm(H)
• Dimensions = 8.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Reference Standard  =  GB/T 14472-98 (IEC 384-14)
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.001 (1kHz, 20°C)

MBM, MB10F 0.8A 1000V Bridge Rectifiers Diode pack of 5000

Specification:-

• Case: MBM
• Maximum respective peak reverse voltage: 1000v
• Maximum average rectified current: 0.8A
• Maxim reverse current: 5.0µA
• Non-Repetitive Peak Forward Surge Current: 30A
• Maxim forward voltage: 1.1V

Metal Oxide Through-Hole Varistor (MOV-20D431K) Pack of 5

Specification:-

• Voltage Rating AC: 275V
• Voltage Rating DC: 350V
• Max Clamp Voltage: 710V
• Varistor Case: 20mm Disc
• Number of poles: 2
• Mounting type: PCB

0.0068μF 682J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V 
2. Dimensions = 10.5mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance =  ≥ 1250S Ω 

0.33μF 334J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 29.0mm(W)
• Dimensions = 28.0mm(H)
• Dimensions = 18.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

BC808 500mA 25V SOT-23 PNP Bipolar transistors pack of 5 pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 25V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 100MHz
7. Gain H(fe): 100/630
8. Collector current:  500mA

CD4067 16-Channel Analog Multiplexer/Demultiplexer IC (DIP-24 Package)

Specification:-

• Supply current: 0.04 uA
• 5-V, 10-V, and 15-V parametric ratings
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V
• Temperature range; 100nA at 18 V and 25°C
• Low ON resistance: 125  (typ.) over 15 Vp-p signal-input range for VDD – VSS = 15 V
• High OFF resistance: channel leakage of ±10 pA (typ.) @ VDD – VSS = 10 V
• Matched switch characteristics: RON = 5 (typ.) for VDD – VSS = 15 V