ALL ELECTRONICS COMPONENTS

CD4067 16-Channel Analog Multiplexer/Demultiplexer IC (DIP-24 Package)

Specification:-

• Supply current: 0.04 uA
• 5-V, 10-V, and 15-V parametric ratings
• 100% tested for quiescent current at 20 V
• Maximum input current of 1 µA at 18 V
• Temperature range; 100nA at 18 V and 25°C
• Low ON resistance: 125  (typ.) over 15 Vp-p signal-input range for VDD – VSS = 15 V
• High OFF resistance: channel leakage of ±10 pA (typ.) @ VDD – VSS = 10 V
• Matched switch characteristics: RON = 5 (typ.) for VDD – VSS = 15 V

2K ohm ( Ω ) single turn trimpot variable resistors 3386P-1-202LF pack of 50pcs

Specifications:-

1. Type                            : Single turn variable resistor
2. Resistance value       : 2K Ω
3. Power rating              : 300V
4. Temperature Range : -55 °C to +125 °C
5. Rotational cycle        : 200 cycles

T1117-5 SOT 223 Voltage Regulator Pack of 2500pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 4.950 - 5.050

DO-15, FR202 100V Fast Recovery Rectifiers Diode pack of 5pcs

Specification 

1. Maximum respective peak reverse voltage : 100v
2. Maximum average rectified current : 2.0A
3. Maxim reverse current : 5.0µA
4. Case :  DO-15
5. Non-Repetitive Peak Forward Surge Current : 70A
6. Operating Junction Temperature Range : − 65 to +150°C 
7. Maxim forward voltage : 1.3V
8. Maximum reverse recovery time  150ns

BC808 500mA 25V SOT-23 PNP Bipolar transistors pack of 5 pcs

Specification

1. Type of transistor: PNP
2. Polarisation: bipolar
3. Collector-emitter voltage: 25V
4. Power dissipation: 200mW
5. Case: SOT23
6. Frequency: 100MHz
7. Gain H(fe): 100/630
8. Collector current:  500mA

SMA, SS28 80V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 80v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 0.85V

0.22μF 224J 630V CL20 Axial-Type Metallized Polyester Film Capacitors Pack of 5pcs

Specification:-

• Rated voltage = 630V
• Dmax = 11.0mm
• Lmax = 28.0mm
• Reference Category = GB 7332 (IEC 384-2)
• Climatic Category = 40/085/21
• Voltage Proof = 1.6UR (5s)
• Dissipation Factor = ≤1.0% (20°C, 1KHz)

1N4934 100V ,DO-41 Fast Recovery Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 100V
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 200ns
• Package : DO-41

0.33μF 334J 200V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 200V
• Dimensions = 29.0mm(W)
• Dimensions = 28.0mm(H)
• Dimensions = 18.0mm(T)
• Dimensions = 24.0mm(P)
• Dimensions = 0.8(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

KBP, KBP3005 3A 50V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : KBP
2. Maximum respective peak reverse voltage : 50v
3. Maximum average rectified current : 3.0A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 80A
6. Maxim forward voltage : 1.1V

MBM, MB10F 0.8A 1000V Bridge Rectifiers Diode pack of 5000

Specification:-

• Case: MBM
• Maximum respective peak reverse voltage: 1000v
• Maximum average rectified current: 0.8A
• Maxim reverse current: 5.0µA
• Non-Repetitive Peak Forward Surge Current: 30A
• Maxim forward voltage: 1.1V

0.0068μF 682J 250V CL21 Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 250V 
2. Dimensions = 10.5mm(W)
3. Dimensions = 7.5mm(H)
4. Dimensions = 4.5mm(T)
5. Dimensions = 8.0mm(P)
6. Standard  =  GB 7335 (IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K),±10%(M)
8. Insulation Resistance =  ≥ 1250S Ω