ALL ELECTRONICS COMPONENTS

IRF740 400V 10A N-Channel Power MOSFET (TO-220 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 400V
• Continuous Drain Current (Id): 10A
• Drain-Source Resistance (Rds On): 0.54 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 53 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 134W

SMBJ30 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 33.3V
3. Maximum Breakdown voltage : 40.7V
4. Stand-off voltage : 30.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 11.2A
7. Maximum clamping voltage : 53.5V
8. Power dissipation : 600W

SMBJ16 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 17.8V
3. Maximum Breakdown voltage : 21.8V
4. Stand-off voltage : 16.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 20.8A
7. Maximum clamping voltage : 28.8V
8. Power dissipation : 600W

3.3uf / 100V Aluminum Electrolytic Capacitors (5 X 11)mm pack of 5 pcs

Specification

1. Terminals:2
2. Material: Aluminum 
3. Capacitor Size: 5 x11mm
4. Voltage Rating :  100V
5. Capacitance: 3.3uf
6. Capacitance tolerance : ±20%(M)

CD4518 Dual BCD Up Counter IC (DIP-16 Package)

Specification:-

• Maximum input current of 1 µA at 18 V 
• Noise margin (over full package-temperature range):
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• 100% tested for quiescent current at 20 V
• Standardized, symmetrical output characteristics

0.27μF 274J 63V CL21X Metallized Polyester Film Capacitor Pack of 5pcs

Specification:-

1. Rated voltage : 63V
2. Dimensions = 10.2mm(W)
3. Dimensions = 10.0mm(H)
4. Dimensions = 5.5mm(T)
5. Dimensions = 7.5mm(P)
6. Standard  =  GB/T 7332(IEC 384-2)
7. Capacitance Tolerance = ±5%(J), ±10%(K)
8. Insulation Resistance = ≥ 18000M Ω 

0.027μF 273J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 17.0mm(W)
• Dimensions = 14.0mm(H)
• Dimensions = 10.0mm(T)
• Dimensions = 10.0mm(P)
• Dimensions = 0.6(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

1S80 80V ,R-1 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 80V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 30A
• Maximum reverse current @ VRRM TA = 25°C : 0.5mA 
• Package : R-1

SR1150S/SB1150S 150V ,A-405 Schottky Barrier Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 150V
• Maximum average rectified current : 1.0A
• Peak forward surge current 8.3ms single half sine- wave : 40A
• Maximum reverse current @ VRRM TA = 25°C : 0.2mA 
• Package : A-405

470uf 63V Aluminum Electrolytic Capacitors (13 X 25 mm) Pack of 5pcs

Specification

• Rating Voltage = 63V
• Material = Aluminum
• Capacitor Size = 13 x 25 mm
• Impedance (O)max. 20°C 1000KHz = 43
• Ripple current = 750
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

GBJ6, GBJ608 6A 800V Bridge Rectifiers Diode pack of 2pcs

Specification

1. Case : GBJ6
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 6.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 150A
6. Maxim forward voltage : 1.0V

82µF 400V Aluminum Electrolytic Capacitors (18 x 30 mm) Pack of 5pcs

Specification:

• Rating Voltage = 400V
• Material = Aluminum
• Capacitor Size = 18 x 30 mm
• Ripple current = 0.5
• Case Dia = D=16?18
• DC Leakage Current = ≤ 0.03CV+10 (uf) at 20°C
• Shelf Life = After storage for 1000 Hrs at + 105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”