ALL ELECTRONICS COMPONENTS

1.5KE400 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 360.0V
• Maximum Breakdown voltage: 440.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 4.0A
• Maximum clamping voltage: 572.0V
• Maximum Temperature Coefficient of VBR: 0.110%
• Power Dissipation: 1500W
• Package: DO-201AD

SMAJ130 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 144.00V
3. Maximum Breakdown voltage : 176V
4. Stand-off voltage : 130.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 1.3A
7. Maximum clamping voltage : 231.0V
8. Power dissipation : 400W

SMA, SMAJ17, 17.0V Surface Mount Transient Voltage Suppressors Rectifiers Diode pack of 5pcs

Specification

1. Case : SMA
2. Maximum respective peak reverse voltage : 17.0v
3. Maximum average rectified current : 9.8A
4. Maxim reverse current : 5.0µA
5. Maxim forward voltage : 30.5V

SMBJ36 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 40.00V
3. Maximum Breakdown voltage : 48.9V
4. Stand-off voltage : 36.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 9.3A
7. Maximum clamping voltage : 64.3V
8. Power dissipation : 600W

P6KE47A 5.0µA, DO-15 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 44.7V
• Maximum Breakdown voltage: 49.4V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 9.3A
• Maximum clamping voltage: 64.8V
• Maximum Temperature Coefficient of VBR: 0.101%
• Power Dissipation: 600W
• Package: DO-15

0.0068μF 682J 160V CBB18 Polypropylene Film Capacitor Pack of 5pcs

Specification:-

• Rated voltage : 160V
• Dimensions = 14.0mm(W)
• Dimensions = 12.0mm(H)
• Dimensions = 7.0mm(T)
• Dimensions = 7.5mm(P)
• Dimensions = 0.5(d)
• Standard  =  GB10188 (IEC384-13) 
• Climatic Category = 40/085/21
• Dissipation Factor = ≤ 0.0008 (20°C, 1KHz)

22uF 1210 50V SMD Capacitor Pack of 50

Specification:-

• Case type : 1210
• Capacitance : 22uF
• Tolerance :  ±  5%
• Voltage range : 50V
• Mounting Type : SMD
• Operating Temperature Range (°C) : -55 °C to +125 °C

CD4071 Quad 2-input OR gate IC (DIP-14 Package)

Specification:-

• Voltage at Any Pin: −0.5V to VDD +0.5V
• Power Dissipation (PD) Dual-In-Line: 700 mW
• VDD Range: −0.5 VDC to +18
• VDC Storage Temperature (TS): −65°C to +150°C
• Lead Temperature (TL):  260°C
• Maximum input leakage 1 µA at 15V

CD4013 Dual D Type Flip-Flop IC (DIP-14 Package)

Specification:-

• Output type: Push-Pull
• Input type: Standard CMOS
• Wide supply voltage range: 3V to 18V
• Noise Margin (Over Full Package Temperature Range):
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• Medium-Speed Operation: 16 MHz (Typical) 

FAN7392 High and Low-Side Gate-Drive IC (DIP-14 Package)

Specification:-

• High-Side Floating Supply Voltage: -0.3 to 625 V
• High-Side Floating Offset Voltage: VB-25.0 to VB+0.3 V
• High-Side Floating Output Voltage: VS-0.3 to VB+0.3 V
• Low-Side Supply Voltage -0.3 to 25V
• Low-Side Floating Output Voltage: -0.3 to VCC+0.3 V
• Logic Supply Voltage: -0.3 to VSS+25.0 V
• Logic Supply Offset Voltage: VCC-25.0 to VCC+0.3 V
• Logic Input Voltage (HIN, LIN and SD)VINVSS: -0.3 to VDD+0.3 V

IRFP250N 200V 30A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 200V
• Continuous Drain Current (Id): 30A
• Drain-Source Resistance (Rds On): 0.075 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 123 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 214W

SA100 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 111 , Max(V) 136.0
• Maximum peak current : 2.8
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15