ALL ELECTRONICS COMPONENTS

CD4013 Dual D Type Flip-Flop IC (DIP-14 Package)

Specification:-

• Output type: Push-Pull
• Input type: Standard CMOS
• Wide supply voltage range: 3V to 18V
• Noise Margin (Over Full Package Temperature Range):
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• Medium-Speed Operation: 16 MHz (Typical) 

5KP70 10µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 77.8V
• Maximum Breakdown voltage: 95.1V
• Maximum Reverse Leakage Current: 10µa
• Maximum peak pulse current: 40A
• Maximum clamping voltage: 125V
• Power Dissipation: 5000W
• Package: R-6

P6KE20A 5.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:

• Minimum Breakdown voltage: 19.0V
• Maximum Breakdown voltage: 21.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 22A
• Maximum clamping voltage: 27.7V
• Maximum Temperature Coefficient of VBR: 0.090%
• Power Dissipation: 600W
• Package - DO-15

SA30A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 33.3 , Max(V) 36.8
• Maximum peak current : 10.3A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

SMC(G) SMCJ70 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 70.0V
3. Maximum peak pulse current : 12.0A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 125V
6. Power dissipation : 1500W

SMBJ7.5 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 8.33V
3. Maximum Breakdown voltage : 10.3V
4. Stand-off voltage : 7.5
5. Maximum reverse leakage current : 100
6. Maximum peak pulse current : 42.0A
7. Maximum clamping voltage : 14.3V
8. Power dissipation : 600W

AM27C256-120JI EPROM OTP Memory IS 256 Bit Parallel 120ns 32-PLCC (14x11.46)

Specification:-

• Technology: CMOS
• Memory Density: 16384 bit
• Number of Terminals: 32 PLCC
• Supply Voltage-Max (Vsup): 5.5 V
• Supply Voltage-Min (Vsup): 4.5 V
• Supply Voltage-Nom (Vsup): 5 V
• Supply Current-Max: 0.03 mA

74HC93 4-Bit Binary Ripple Counter SMD IC

Specification:-

• Mounting: SMD
• Supply Voltage: − 0.5 to + 7.0V
• DC Input Diode Current: ±20
• DC Output Diode Current: ±20mA
• DC VCC or GND Current, per pin: 50mA
• Temperature Range: -55°C to 150°C

74HC32 Quad 2-Input OR Gate SMD IC

Specification:-

• Mounting: SMD
• Number of: 14 Pins
• Power Dissipation: 500 mW
• Voltage Rating: 2.0 to 6.0V
• Operating Temperature: 0°C to 70°C

CD4046 Micropower Phase Locked Loop IC (DIP-16 Package)

Specification:-

• Voltage: 3V to 18V
• Low frequency drift: 0.04%/°C (typ.) at VDD = 10 V
• High VCO linearity: <1% (typ.) at VDD = 10 V
• 100% tested for quiescent current at 20 V
• 5-V, 10-V, and 15-V parametric ratings
• Operating temperature range: −55°C to +125°C
• Very low power consumption: 70 µW (typ.) at VCO fo = 10 kHz, VDD = 5 V
• Operating frequency range up to 1.4 MHz (typ.) at VDD = 10 V, RI = 5 k ohm

2SK1317 1500V 2.5A N-Channel Power MOSFET (TO-3P Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 1500V
• Collector Current (Ic): 2.5A
• Drain-Source Resistance (Rds On): 12Ohms
• Gate-Source Voltage (Vgs): 20V
• Configuration: Single
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 100W

SA8.5 10µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 9.44 , Max(V) 11.5
• Maximum peak current : 31.4A
• Maximum reverse leakage current @ VRWM : 10µA
• Power dissipation :500W
• Package : DO-15