ALL ELECTRONICS COMPONENTS

74HC573 Octal D-Type Transparent Latch IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

0.0033μF 332J 630V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 630V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 5.0mm
8. Dimensions of Length : 13.0mm

74HC04 Hex Inverter IC (7404 IC) DIP-14 Package

Specification:-

• Number of pins: 14
• Type: DIP Bipolar
• Mounting: Through Hole
• Voltage Rating: 4.75 to 5.25V
• Current Rating (Max): 16mA
• Operating Temperature:  0°C to + 70°C

IRFP240 200V 20A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): -200V
• Continuous Drain Current (Id): 20A
• Drain-Source Resistance (Rds On): 0.18 Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 70 nC
• Operating Temperature Range: -55 – 175°C
• Power Dissipation (Pd): 150W

1.3R ohm 0603 High Power SMD Thick Film Chip Resistor Pack of 5000

Specification:-

• Case type: 0603
• Resistance: 1.3R
• Tolerance:  ± 5%
• Power Rating (Watt): 0.25W, 1/4W
• Operating Temperature: -55 °C to +155 °C
• Element type : Thick film chip
• Operating voltage range: 180V to 220V

AT89C51-24JI Microcontroller IC 8-Bit 24MHz 4KB (44-PLCC)

Specification:-

• Package: PLCC-44 (16.6x16.6)
• No. of Pins: 44
• Speed: 24MHz
• Core Processor: 8051
• Data RAM Size: 128 B
• Program Memory Type: FLASH
• Program Memory Size: 4KB (4K x 8)
• Supply Voltage Min: 4 V
• Number of Programmable I/Os: 32
• Mounting Type: Surface Mount

1.5KE170A 5.0µA, DO-201AD Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 162.0V
• Maximum Breakdown voltage: 179.0V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 6.4A
• Maximum clamping voltage: 234.0V
• Maximum Temperature Coefficient of VBR: 0.108%
• Power Dissipation: 1500W
• Package: DO-201AD

SMC(G) SMCJ130A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 130.0V
3. Maximum peak pulse current : 7.2A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 209V
6. Power dissipation : 1500W

SMC(G) SMCJ30A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 30.0V
3. Maximum peak pulse current : 31.0A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 48.4V
6. Power dissipation : 1500W

SMC(G) SMCJ6.0A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 6.0v
3. Maximum peak pulse current : 145.6A
4. Maxim reverse current : 800µA
5. Maximum clamping voltage : 10.3V
6. Power dissipation : 1500W

74HC138 3-to-8 line Decoder/Demultiplexer IC DIP-16 Package

Specification:-

• Number of pins: 16
• Low quiescent current: 80 µA
• Voltage Rating: 2 to 6V
• Propagation Delay: 20ns
•  Fanout of 10 LS-TTL loads
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

CD4016 Quad Bilateral Switch IC (DIP-14 Package)

Specification:-

• Wide supply voltage range: 3V to 15V
• VDD Supply Voltage: −0.5V to +18V
• VIN Input Voltage: −0.5V to VDD + 0.5V
• TS Storage Temperature Range: −65°C to + 150°C
• Power Dissipation: Dual-In-Line: 700 mW
• Frequency response, switch “ON”: 40 MHz (typ.)
• Lead Temperature: 260°C