ALL ELECTRONICS COMPONENTS

SMBJ43 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 47.80V
3. Maximum Breakdown voltage : 58.4V
4. Stand-off voltage : 43.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 7.8A
7. Maximum clamping voltage : 76.7V
8. Power dissipation : 600W

IRFPG50 1000V 6.1A N-Channel Power MOSFET (TO-247 Package)

Specification:-

• Number of Channels: 1 Channel
• Transistor Polarity: N-Channel
• Drain-Source Breakdown Voltage (Vds): 1000V
• Continuous Drain Current (Id): 6.1A
• Drain-Source Resistance (Rds On): 20Ohms
• Gate-Source Voltage (Vgs): 20V
• Gate Charge (Qg): 190 nC
• Operating Temperature Range: -55 – 150°C
• Power Dissipation (Pd): 190W

10K Ohm 500mW Single Turn Pin Through Hole Trimmer Potentiometer (3362P-1-103LF) Pack of 50

Specification:-

• Product: Single Turn
• Number of Turns: 1
• Resistance: 10K Ohm
• Power Rating: 500mW (1/2 W)
• Voltage Rating: 300V
• Tolerance: 10%
• Operating Temperature: -55°C ~ +125°C

SA70A 1.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 77.8 , Max(V) 86.0
• Maximum peak current : 4.4A
• Maximum reverse leakage current @ VRWM : 1.0µA
• Power dissipation :500W
• Package : DO-15

IR2101 High and Low Side Driver IC (DIP-8 Package)

Specification:-

• High side floating supply voltage: -0.3 to 625 V
• High side floating supply offset voltage: VB -25 to VB +0.3 V
• High side floating output voltage: -0.3 to VB +0.3 V
• Low side and logic fixed supply voltage: -0.3 to 25V
• Low side output voltage: -0.3 to VCC+0.3 V
• Logic supply Voltage: -0.3 to VSS+0.3 V

DW06D/S 2-in-1 Lithium Battery Protection IC SOT-23-6

Specification:-

• Package: SOT-23-6
• High-precision voltage detection
• Voltage Thresholds: Overcharge at 4.25V ± 0.05V, over-discharge at 2.50V ± 0.10V.
• Low quiescent current consumption: normal operating current 3.8uA
• Low Power Consumption

P4KE18 5.0µA ,DO-41 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 16.2 , Max(V) 19.8
• Maximum peak current : 16A
• Maximum reverse leakage current @ VRRM : 5.0µA
• Package : DO-41

SMC(G) SMCJ100A 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 100.0V
3. Maximum peak pulse current : 9.3A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 162V
6. Power dissipation : 1500W

74HC390 Dual 4-bit Decade Ripple Counter IC

Specification:-

• Mounting: SMD
• Input levels: CMOS level
• Power Dissipation: 500 mW
• Supply Voltage: − 0.5 to + 7.0V
• Clamp Diode Current (IIK, IOK) : ± 20 mA
• Operating Temperature: -65°C to 150°C

SA7.5 50µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:-

• Breakover voltage : Min(V) 8.33 , Max(V) 10.2
• Maximum peak current : 35.0A
• Maximum reverse leakage current @ VRWM : 50µA
• Power dissipation :500W
• Package : DO-15

SMC(G) SMCJ28 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 28.0V
3. Maximum peak pulse current : 30.0A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 50.0V
6. Power dissipation : 1500W

SMBJ70A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 77.80V
3. Maximum Breakdown voltage : 86.0V
4. Stand-off voltage : 70.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 5.3A
7. Maximum clamping voltage : 113.0V
8. Power dissipation : 600W