ALL ELECTRONICS COMPONENTS

5KP7.5A 250µA ,R-6 Transient Voltage Suppressor Pack of 100

Specification:

• Minimum Breakdown voltage: 8.33V
• Maximum Breakdown voltage: 9.21V
• Maximum Reverse Leakage Current: 250µa
• Maximum peak pulse current: 388A
• Maximum clamping voltage: 12.9V
• Power Dissipation: 5000W
• Package: R-6

A-405, FR106SG 800V Glass Passivated Fast Recovery Rectifiers Diode pack of 5pcs

Specification

1. Case :  A-405
2. Maximum respective peak reverse voltage : 800v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 5.0µA
5. Non-Repetitive Peak Forward Surge Current : 30A
6. Maxim forward voltage : 1.3V
7. Maximum reverse recovery time : 500ns

1N5398G 800V ,DO-15 Glass Passivated General Purpose Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 800V
• Maximum average rectified current : 1.5A
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Package : DO-15

SMAJ78A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 86.70V
3. Maximum Breakdown voltage : 95.8V
4. Stand-off voltage : 78.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 2.4A
7. Maximum clamping voltage : 126.0V
8. Power dissipation : 400W

SMAJ60A 400W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMA/SMA(G)
2. Minimum Breakdown voltage : 66.70V
3. Maximum Breakdown voltage : 73.7V
4. Stand-off voltage : 60.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 3.1A
7. Maximum clamping voltage : 96.8V
8. Power dissipation : 400W

74HC574 Tri State Octal D-Type Flip-Flop IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Input Voltage (VIN):  −1.5V to VCC + 1.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 600 mW
• Operating Temperature (°C): − 65°C to + 150°C

SMC(G) SMCJ45 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 45.0V
3. Maximum peak pulse current : 18.7A
4. Maxim reverse current : 5.0µA
5. Maximum clamping voltage : 80.3V
6. Power dissipation : 1500W

SMC(G) SMCJ8.0 1500W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification

1. Case : SMC(G)
2. Stand-off voltage : 8.0V
3. Maximum peak pulse current : 100.0A
4. Maxim reverse current : 50µA
5. Maximum clamping voltage : 15.0V
6. Power dissipation : 1500W

MAX488 RS-485/RS-422 Line Driver/Receiver IC (DIP-8 Package)

Specification:-

• Part Number: MAX488
• Pin Count: 8
• Data Rate: 0.25 (Mbps)
• Slew-Rate Limited
• Number Of Receivers On Bus: 32
• Quiescent current: 120 mA

P6KE16A 5.0µA ,DO-15 Transient Voltage Suppressors Pack of 100

Specification:

• Minimum Breakdown voltage: 15.2V
• Maximum Breakdown voltage: 16.8V
• Maximum Reverse Leakage Current: 5.0µa
• Maximum peak pulse current: 27A
• Maximum clamping voltage: 22.5V
• Maximum Temperature Coefficient of VBR: 0.086%
• Power Dissipation: 600W
• Package - DO-15

ACPL-782T-000E Isolation Amplifier IC 8-PDIP

Specification:-

• Package: PDIP-8 (0.300", 7.62mm) 
• No. of Pins: 8-Pins
• Supply Voltage : 5.5 V
• Maximum Power Dissipation: 600 mW
• Number of Channels per Chip: 1 Channel
• Operating Temperature: -40°C ~ 125°C

DG408D Improved, 8-Channel/Dual 4-Channel, CMOS Analog Multiplexer IC

Specification:-

• Peak Current: 100mA
• Continuous Current: 30mA
• Low On-Resistance, 100Ω Max
• Input Leakage, 5nA Max at +85°C
• Low Power Consumption, 1.25mW Max
• Operating Temperature Ranges: 0°C to +70°C
• Storage Temperature Range: -65°C to +150°C