ALL ELECTRONICS COMPONENTS

TTP223-BA6 One-Touch Key Detecting 6-Pin IC (SOT23) Pack of 50

Specification:-

• Package: SOT23-6
• Operating Voltage: 2V-5.5V
• Startup Calibration Delay: 0.5 Sec
• Low power consumption in standby mode
• Configurable active high/low and toggle/momentary output

HER155 400V,DO-15 High Efficiency Rectifiers Pack of 5pcs

Specification:-

• Maximum repetitive peak reverse voltage : 400V
• Peak forward surge current 8.3ms single half sine- wave : 50A
• Maximum reverse current @ VRRM TA = 25°C : 5.0µA 
• Maximum reverse recovery time : 50ns
• Package : DO-15

SMBJ70 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 77.80V
3. Maximum Breakdown voltage : 95.1V
4. Stand-off voltage : 70.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 4.8A
7. Maximum clamping voltage : 125.0V
8. Power dissipation : 600W

3.3M Ohm 1206 High Power SMD Thick Film Chip Resistor Pack of 50

Specification:-

• Case type: 1206
• Resistance: 1K
• Tolerance:  ± 5%
• Power Rating (Watt): 0.25W, 1/4W
• Operating Temperature: -55 °C to +155 °C
• Element type: Thick film chip
• Operating voltage range: 180V to 220V

103 1KV 6.5mm Multilayer Ceramic Capacitor 0.1uf

Specification:-

• Capacitance: 0.1uF
• Voltage: 1000V
• Mounting: Through Hole
• Tolerance: ±20 %
• Material: Ceramic

SMBJ85A 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 94.40V
3. Maximum Breakdown voltage : 104V
4. Stand-off voltage : 85.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 4.4A
7. Maximum clamping voltage : 137.0V
8. Power dissipation : 600W

SMBJ20 600W Surface Mount Transient Voltage Suppressors Pack of 5pcs

Specification:-

1. Package : SMB/SMB(G)
2. Minimum Breakdown voltage : 22.2V
3. Maximum Breakdown voltage : 27.1V
4. Stand-off voltage : 20.0
5. Maximum reverse leakage current : 5.0
6. Maximum peak pulse current : 16.8A
7. Maximum clamping voltage : 35.8V
8. Power dissipation : 600W

AT24C01A-10PC EEPROM Memory IC 8-PDIP

Specification:-

• Package: PDIP-8 (0.300", 7.62mm) 
• No. of Pins: 8-Pins
• Mounting Type: Through Hole
• Memory Size: 1 Kbit
• Access Time: 900 ns
• Maximum Clock Frequency: 0.4 MHz
• Supply Voltage Min: 4.5 V
• Supply Voltage Max: 5.5 V
• Operating Temperature: 0°C to 70°C

74HC541 Octal 3-State Buffer/Line Driver IC DIP-20 Package

Specification:-

• Number of pins: 20
• Mounting: Through Hole
• Wide operating voltage range: 2V–6V
• Supply Voltage (VCC): − 0.5 to + 7.0V
• Output Voltage (VOUT): − 0.5 to VCC + 0.5V
• DC Output Current, per pin (IOUT): ± 35 mA
• DC VCC or GND Current, per pin (ICC): ± 70 mA
• Power Dissipation: 500 mW
• Operating Temperature (°C): − 65°C to + 150°C

CD4028 BCD to Decimal Decoder IC (DIP-16 Package)

Specification:-

• Supply Voltage:  3V to 18V
• Noise margin (full package-temperature range) =
• 1 V at VDD = 5 V
• 2 V at VDD = 10 V
• 2.5 V at VDD = 15 V
• 5-V, 10-V, and 15-V parametric ratings
• Operating Temperature Range: -55°C to +125°C

1000uF 16V SMD Electrolytic Capacitor Pack of 5

Specification:-

• Type: SMD Electrolytic
• Capacitance: 1000uF
• Rated Voltage: 16V
• Tolerance: ±10%
• Mounting Type: SMD
• Operating Temperature: -45℃~+105℃

AT93C66A-10TU-2.7 EEPROM Memory IC 8-TSSOP

Specification:-

• Package: TSSOP-8 (0.173", 4.40mm)
• No. of Pins: 8-Pins
• Memory Size: 4Kb (512 x 8, 256 x 16)
• Maximum Clock Frequency: 2 MHz
• Supply Voltage Min: 2.7 V
• Supply Voltage Max: 5.5 V
• Operating Temperature: -40°C ~ 85°C