SENSORS & MODULES

10K potentiometer with 3 pin XH JST male connector for Volume control, Motor speed control

Specifications

• Material: metal, plastic
• Resistance value: 10k ohm
• Adjustment type: top adjustment 
• Knurled shaft: total rotational angle: 300C
• Terminal number : 3 shaft diameter: 6mm
• Rotary knob shaft length: 13mm
• Main used to control electrical devise such as volume controls on audio equipment

12V -24V Bass Treble Amplifier Board

Specification:-

• Voltage Range: 12V to 24V DC
• Bass Control: Adjusts low-frequency sounds.
• Treble Control: Adjusts high-frequency sounds.
• Input/Output:
• Input: Often supports 3.5mm AUX or RCA connections for audio sources.
• Output: Connects to speaker terminals for left/right channels.

DC 12V to 60V 8A Automatic Led Infrared PIR Motion Detector Sensor Switch

Specification:-

• Actuator Type:  Sensor
• Voltage: DC 12V-60V 
• Output Current:8V
• Operation Mode: ON-OFF
• Output: 1 Channel

Single Channel 5V Relay Module low level trigger

Specification

1. Number of channels : 1
2. Operating voltage : 5V
3. Trigger voltage : 10V
4. Switching voltage : 250V at 10A
5. Equipped with high-current relay
6. It can control both AC and DC appliances such as Motors, lights, fans, etc.

Micro SD TF Card Memory Shield Module SPI Micro SD Adapter For Arduino

Specifications:-

1. Connects to Arduino using standard SPI pins.
2. Supports Micro SD and TF card formats.
3. Includes a built-in voltage level shifter for 5V and 3.3V systems.
4. Easily interfaces with Arduino for data storage and retrieval.

NPK Soil Agriculture Nutrient Sensor Module

Specification:-

• Item Type: Agriculture Nutrient Sensor 
• Power Supply: 12-24V Dc
• Power Consumption: ≪0.15W
• Storage Environment: 45℃115℃
• High precision agriculture sensors
• Good Quality Durable and Eco Friendly Material.

U-BLOX NEO-6M GPS Module with Flight Controller EPROM

Specification:-

• Model Name: NEO 6M
• Chipset: U-BLOX NEO-6M
• Power Supply: 3.3V to 5V DC
• Current Consumption: Approx. 45mA
• EEPROM: Onboard, for storing configurations

PAM8406 5Wx2 dual channel stereo mini digital amplifier module

Specifications

1.  5-watt output at 10% THD with a 2Ω load and 5v power supply at Class D mode
2. 3-watt output at 10% THD with a 4Ω load and 5v power supply
3. Superior low noise
4. Efficiency up to 90%
5. Output power : 5W +5W
6. Fully short circuit protected

Dual USB Output 5V 2.1A Power bank charging modules with digital 7 segment display indicator pack of 10pcs

Specification:-

1. Equipped with dual USB output
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Intelligent automatic shutdown
5. Smart power output
6. Push button switch control on/off
7. 7 Segment LED display
8. B and C type dual charging port

20 x 2 Yellow/Green color LCD display module (JHD202C)

Specifications:-

1. Color of display: Green
2. Color of character: Yellow
3. Size : 20 x 2 (20 character x 2 rows)
4. Input voltage: +5V
5. Supply current: 1.5mA
6. Board dimensions  :  116mm x 38mm (LxB)
7. Display dimensions   :   83mm x 19mm (LxB)

Digital Capacitive Touch Switch Module For Arduino - TTP223B

Specifications:-

1. Power supply voltage(VCC): 2.0, 3, 5.5 V.
2. Output high VOH: 0.8VCC V
3. Output low VOL: 0.3VCC V
4. Response time (touch mode): 60 mS
5. Output Pin Sink Current (@ VCC = 3V, VOL = 0.6V) : 8 mA
6. Output pin pull-up current (@ VCC = 3V, VOH = 2.4V) : 4 mA
7. Response time (low power mode): 220 mS
8. Size : 2.4 x 2.4

Digital Battery Voltmeter Indicator with Dual USB 12V To 5V Step-down

Specification:-

• Input current: 5-25ma
• USB output: 5V/2A (max)
• Working temperature: -10 ~ +65 degrees
• Working humidity: 10 ~ 80%
• Opening size: 45 × 26 × 18mm