SENSORS & MODULES

L298 Dual Motor Driver Shield For Arduino

Specifications:-

• Motor Driver IC: L298N
• Input Voltage: 5V
• Current per Channel: 2A (peak), 1.5A (continuous)
• Control Type: PWM (speed), Direction (forward/reverse)
• Heat Management

Soil Hygrometer Humidity Detection Moisture Sensor For Arduino

Specifications:-

1. Operating voltage: 3.3V to 5V
2. Dual output mode, analog output more accurate
3. With power indicator (red) and digital switching output indicator (green)
4. Having an LM393 comparator chip, stable

12V to 24V DC converter with 3 USB jacks for mobile charging application

Specification

1. Connector Type USB
2. Mounting Hardware 12v 3 USB Charger
3. Input Voltage 220 Volts (AC)
4. Total USB Ports 3
5. Output Current 2 Amps
6. Output Voltage 5 Volts

DC 3V-30V 3 Wire Digital Voltmeter with Red LED Display

Specifications:-

• Power Source: Battery-Powered
• 3-wire design
• Power Supply Range: DC 3V-30V
• Input Polarity: DC voltage
• Operation Current: <13mA
• Display Color: Red
• Operating Temperature: -10~65°C (14~149°F)

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 10pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

0.91 Inch 128 x 32 Blue OLED Display Module with I2C/IIC Serial Interface

Specification:-

• Driving IC: SSD1306
• Operating Voltage: 3.3-5V
• Resolution: 128×32 pixels
• Text Color: Blue
• Communication Interface: I2C

Pin:

• GND: Power Ground
• VCC: Power + (DC 3.3 ~5v)
• SCL: Clock Line
• SDA: Data Line

HX711 - Load cell voltage amplifier sensor module

Specifications:-

1. Input voltage: ±40mV
2. Data accuracy: 24 bit
3. Refresh frequency: 10 to 80 Hz
4. Operating voltage : 2.7V to 5V DC
5. Operating current: 10 mA

R305 Optical Fingerprint Reader Sensor Module

Specification:-

• Type: Optical
• Sensor Life: 100 million times
• Static indicators: 15KV
• Verification Speed: 0.3 sec
• Scanning Speed: 0.5 sec
• Character file size: 256 bytes
• Supply voltage: DC 3.6 ~ 6.0V / 3.3V
• Supply Current: Current: <120mA
• Fingerprint image time: <1.0 seconds

C-Type 2 Channel BT5.0 Stereo Audio Amplifier 3.7-5V MP3 Audio Receiver Module

Specification:-

• Maximum Supply Voltage: 5 Volts
• Minimum Supply Voltage: 3.7 Volts
• Dimensions: 30 x 30 x 1.5 mm
• Support profile: A2DP, AVCTP, AVDTP, HFP
• BT5.0-Audio: Genuine 5.0 Blue tooth audio decoding chip

LM2596S DC to DC Step-Down Buck Converter Power Supply Module 24V 12V 9V to 5V 5A 25W Replace

Specification:-

• Input voltage: 9-35V
• Output voltage: 5V
• Output current: 5A
• Output power: 25w

Pins Configuration:

• In+: Input positive
• Out+: Output positive
• GND: IN-/OUT

Smart BMS LiFePO4 4S 12V 100A Common Port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 4S 12V 100A
• Continuous Discharge Current: 100A 
• Over-Voltage Protection: 3.8V  
• Charge Current: 50A 
• Charge Voltage: 14.6V 
• Model no. (21a6)

4S 8A 12.8V 18650 Li-ion Lithium battery protection and charger BMS module pack of 1pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage: DC 12.8V
3. Current consumption: 8A
4. Over charge detection voltage: 3.90V±0.25V
5. Overcharge release voltage: 3.80V±0.05V
6. Over discharge detection voltage range: 2.0±0.08V
7. Over discharge release voltage: 32.5±0.1V
8. Low current consumption.
9. Stable performance.