SENSORS & MODULES

CNC Shield V3 3D Printer Expansion Board

Specification:-

1. Compatible with Arduino Uno and GRBL firmware.
2. Supports up to four stepper motor drivers.
3. Expansion board for CNC and 3D printer projects.
4. Includes header pins for easy connection.
5. Compact design for integration into various DIY CNC and 3D printing setups.

Dual USB Output 5V 2.1A 1A Power bank charging modules with digital LCD display indicators pack of 50pcs

Specification:-

1. Equipped with dual USB 5V 2.1A 1A output
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Intelligent automatic shutdown
5. Smart power output
6. Push button switch control on/off,

PAM8403 - GF1002 3W+3W Dual channel audio amplifier boards with switch potentiometer pack of 10pcs

Specification

1. New and branded quality product
2. Dual channel
3. Power output  :  3W+3W
4. Operating voltage  :  2.5V to 5.5V
5. Recommended voltage  :  5V
6. Excellent sound quality
7. On board switch potentiometer

5V 30A 1-Channel Relay Module

Specification:-

• Relay Type: Single channel
• Operating Voltage: 5V DC
• Current Rating: 30 Amps
• Current Capacity: 30A at 250V AC or 30V DC

Pinouts:

• DC+: DC power supply positive pole
• DC-: DC power supply negative pole
• IN: signal triggering pin
• JD+: relay control voltage positive
• JD-: relay control voltage negative

PD65W USB-C Type Fast Charging Module Board

Specification:-

• Voltage: 12V
• Output Power: 65W
• Board Thickness: 2mm
• Input Interface: USB Type-C
• Output Voltage Levels: 5V / 9V / 12V / 15V / 20V
• Charging Protocols Supported: PD3.1, QC3.0

PAM8406 5Wx2 dual channel stereo Mini digital amplifier modules with volume control preset pack of 50pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

Voltage detection sensor module 25V

Specifications:-

1. Input Voltage: 0 to 25V
2. Voltage Detection Range:  0.02445 to 25
3. Analog Voltage Resolution: 0.00489V
4. Needs no external components
5. Easy to use with Microcontrollers
6. Small, cheap, and easily available

4S 20A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Charge Current: 10A 
• Continuous Discharge Current: 20A 
• Over-Voltage Protection: 3.75±0.05  
• Balancing Current: 30±5mA  
• Charge Voltage: 14.6V 
• Model no. (11d4)

4 Channel Wireless Four Button RF Remote Control Receiver Module

Specifications:-

• Receiver operating voltage: DC 5V.
• Operating mode: Non-Locking
• Transmitter Operating voltage: DC 12V
• Transmission distance (m): 3 to 5
• Easy Integration

5V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

TPA3110 2x15W Dual channel stereo audio power amplifier modules pack of 50pcs

Specification

1. Operating voltage:  8V to 18V
2. Output Power:  15W+15W
3. Dual channel
4. Chip name  :  TPA3110
5. Output impedance  :  4 to 8 ohm (Ω)
6. Signal to noise ratio  :  100DB
7. Supply current  :  more than 3A

5mm x 5mm x 5mm Strong Silver Square Shape Neodymium Magnet

Specification:-

• Material: Neodymium (NdFeB)
• Shape: Square/Block
• Dimension: 5mm x 5mm x 5mm
• Magnetization: Axial
• Operating Temperature: -40°C to +80°C
• Coating: Ni+Cu+Ni (Nickel Coated)