SENSORS & MODULES

4S 10A LFP LiFePO4 BMS Hardware 8181A Module

Specification:-

• Model TDT-4S-8181A 10A LFP 
• Input Voltage B+ to B-: -0.3~+15V 
• Overcharge Detection voltage/1CELL: 3.65±0.05V 
• Over discharge Detection voltage/1CELL: 2.32 ± 0.1 V 
• Charge temperature protection 0°C~+50°C 
• Discharge temperature protection 65°C~+75°C 

12V 4 channel relay module with light coupling

Specification:-

1. Number of channels : 4
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

Micro SD Card Reader Module

Specification :-

• Input Voltage: 3.3V/5V
• Current: 0.2~200mA
• Working voltage: VCC 4.5~5.5V
• Micro SDHC up to 32GB
• Supports Micro SD up to 2GB
• Pinouts: GND, VCC, MISO, MOSI, SCK, CS; SPI
• Micro SD Card Slot: Supports standard micro SD cards

250V 16(8) 5M Cable Float Switch Sensor for Water Level Controller

Specification:-

• Cable length: 5m cable 
• Compatible Material: Plastic
• Floaty Water Level Controller
• Rated voltage: 250V
• High quality wire and Plastic Body

BH1750 - Light detection or Lux sensor module

Specifications:-

1. Power Supply : 2.4V-3.6V
2. Less current consumption : 0.12mA
3. Measuring Range : 1 - 65535lx
4. Very small effect of IR radiation
5. Responsive near to the human eye.

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 50pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

24V 4 channel relay module with light coupling

Specification:-

1. Number of channels: 4
2. Operating voltage: 24V
3. Max. current: 30mA
4. Trigger voltage: 24V
5. Switching voltage: 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

4S 100A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 100A 
• Continuous Charge Current: 50A 
• Over-Voltage Protection: 3.75±0.05V  
• Balancing Current: 30±5mA  
• Charge Voltage: 14.6V 
• Working Temp: -20~70 °C 
• Working current: 500 uA 
• Model no. (118e)

GD4142 Dual USB 5V 1A DC to DC step up boosters power bank charging modules pack of 50pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

Micro USB B type Mike Patch straight plug adapter plate welding head breakout board pack of 1pcs

Specifications:-

1. 100% High quality and Branded product
2.  Base material : FR4
3. Number of pins : 5
4. Type : B type
5. Connector type : Female
6. Pin pitch size : 2.54mm
7. Used in wide range of application

A3144 - Hall effect detection sensor module

Specifications:-

1. Operating voltage: 5V DC
2. Output Current: 25mA
3. Power Consumption at Rest: 3mA
4. Detector type: Magnetic Sensing Hall effect
5. Detecting range: 7 mm
6. Easy to use with Microcontrollers
7. Small, cheap, and easily available

9 mm Electret condenser microphone sound sensors pack of 20pcs

Specification:-

1. Operating Voltage  :  2V to 10V
2. Current consumption  :  0.5mA (max)
3. Recommended operating voltage  :  2V
4. Operating Frequency  :  20Hz to 16,000Hz
5. Impedance  :  <2.2kΩ
6. Package includes : 20 pieces