SENSORS & MODULES

12v-40v to 5V 1A Mini Size DC Step-Down Module

Specifications:-

• Input voltage: 12V to 40V
• Output current: 1A
• Internal Soft-Start
• Short circuit protection: current limiting
• Module Properties: non-isolated constant voltage module

GD4142 Dual USB 5V 1A DC to DC step up boosters power bank charging modules pack of 50pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

4S 8A 12.8V 18650 Li-ion Lithium battery protection and charger BMS module pack of 5pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage : DC 12.8V
3. Current consumption : 8A
4. Over charge detection voltage : 3.90V±0.25V
5. Over charge release voltage : 3.80V±0.05V
6. Over discharge detection voltage range : 2.0±0.08V
7. Over discharge release voltage : 32.5±0.1V
8. Low current consumption.
9. Stable performance.

2S 4A 3.7V 18650 Li-ion Lithium battery protection and charger BMS modules JH886044 pack of 10pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage : DC 8.4V
3. Current consumption : 4A
4. Overcharge detection voltage : 4.28±0.25V
5. Overcharge release voltage : 4.08±0.05V
6. Over-discharge detection voltage range : 2.9±0.10V
7. Over-discharge release voltage : 3.0±0.10V
8. Low current consumption.
9. Stable performance.

5V-15V DC NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator

Specification:-

• Main chip: NE555
• Input Voltage: 5V-15V DC
• Maximum output current: 15MA
• Generate an adjustable pulse for MCU
• Generate an adjustable pulse, to control circuitry associated

FS IA6B 2.4GHz 6 Channel PPM with iBus Port Receiver

Specification:-

• Model: FS-iA6B
• Operating Voltage (VDC):4.0 ~ 8.4V
• No. of Channels:6
• No. of Band:140
• Encoding: GFSK.
• RF Range:2.4055–2.475 GHz.
• Video Format Supported: NTSC/PAL

TTP229 - 16 Channel capacitive touch sensor module

Specifications:-

1. Onboard TTP229 capacitive touch sensor
2. Operating voltage 2.4V~5.5V.
3. Built-in regulator.
4. Operating current = 3V no load.
5. At fast mode typical 9.0uA
6. The response time about 100mS at fast mode, 200mS at low power mode

2S 20A 8.4V 18650 Li-ion Lithium battery protection and charger BMS modules pack of 10pcs

Specification:-

1. Brand new and reliable product
2. Power rating: 20A
3. Overcharge release voltage: 4.25V-4.35V±0.05V
4. Overcharging voltage range: 4.25±0.05V
5. Over-discharge voltage range: 2V-3V±0.1V
6. Low current consumption.
7. Stable performance

Dual Stepper Motor Driver Module

Specifications:-

1. MADE IN INDIA
2. High noise immunity inputs.
3. Operating voltage:  5V to 12V
4. High noise immunity inputs.
5. Thermal Shutdown

3S 10A 11.1V 18650 Li-ion Lithium battery protection and charger BMS module pack of 5pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage: DC 13V
3. Current consumption: 10A
4. Overcharge detection voltage: 4.25 ± 0.025V
5. Overcharge release voltage: 4.19V±0.050V
6. Over discharge detection voltage range: 2.80 ± 0.10V
7. Over discharge release voltage: 3.0±0.10V
8. Low current consumption.
9. Stable performance.

5V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 5V
3. Max. current : 20mA
4. Trigger voltage : 5V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

110-240 AC 300W/1200W Automatic Infrared Motion Sensor Switch

Specification:-

• Power source: 110-240V AC
• Power consumption: 0.45W (static 0.1W)
• Time delay: Min: 8s±3sec
• Light-control: <3LUX(adjustable)
• Detection range: 12m Max (24°C)
• Detection angle: 180°
• Installation height: 1.8m~2.5m
• Working temperature: -10°C~+40°C
• Working humidity: <93%RH