SENSORS & MODULES

4S 8A 12.8V 18650 Li-ion Lithium battery protection and charger BMS module pack of 5pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage : DC 12.8V
3. Current consumption : 8A
4. Over charge detection voltage : 3.90V±0.25V
5. Over charge release voltage : 3.80V±0.05V
6. Over discharge detection voltage range : 2.0±0.08V
7. Over discharge release voltage : 32.5±0.1V
8. Low current consumption.
9. Stable performance.

ESP-WROOM-32D 4M Wireless WiFi and Bluetooth Module

Specification:-

• WiFi: 802.11 b/g/n
• SPI Flash: 4 MB
• Frequency: 2.4 GHz
• Operating voltate: 2.2-3.6V
• Operating Temperature: -40 C + 85 C
• Xtensa: 32-bit LX6 microprocessors
• Wi-Fi mode: Station/softAP/SoftAP+station/P2P

A3144 - Hall effect detection sensor module

Specifications:-

1. Operating voltage: 5V DC
2. Output Current: 25mA
3. Power Consumption at Rest: 3mA
4. Detector type: Magnetic Sensing Hall effect
5. Detecting range: 7 mm
6. Easy to use with Microcontrollers
7. Small, cheap, and easily available

2S 4A 3.7V 18650 Li-ion Lithium battery protection and charger BMS modules JH886044 pack of 10pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage : DC 8.4V
3. Current consumption : 4A
4. Overcharge detection voltage : 4.28±0.25V
5. Overcharge release voltage : 4.08±0.05V
6. Over-discharge detection voltage range : 2.9±0.10V
7. Over-discharge release voltage : 3.0±0.10V
8. Low current consumption.
9. Stable performance.

TTP229 - 16 Channel capacitive touch sensor module

Specifications:-

1. Onboard TTP229 capacitive touch sensor
2. Operating voltage 2.4V~5.5V.
3. Built-in regulator.
4. Operating current = 3V no load.
5. At fast mode typical 9.0uA
6. The response time about 100mS at fast mode, 200mS at low power mode

DC 12V Dual Channel Transmitter RF Relay Module with Remote Controller

Specification:-

• Channels: 2
• Voltage: DC12V
• Current Rating: 10 Amps
• Working frequency: 433MHz/315MHz
• Working temperature: -30°c+70°c
• Material: Plastic + Metal

4S 40A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 40A 
• Continuous Charge Current: 20A 
• Over-Voltage Protection: 3.75±0.05  
• Balance Current: 30±5mA  
• Charge Voltage: 14.6V 
• Model no. (11b3)

GP2Y1010AU0F Dust and smoke particle detection sensor module

Specifications:-

1. Sensitivity : 0.5V/(100μg/m3)
2. Measurement range : 500μg/m3
3. Power : 2.5V to 5.5V
4. Operating current : 20mA(max)
5. Operating temperature : -10℃ to 65℃

240 x 64 Yellow/Green color LCD display module (JHD 24064C-732M0)

Specifications

1. Color of display: Green
2. Color of character: Yellow
3. Size : 240 x 64 (240 character x 64 rows)
4. Input voltage : +5V
5. Supply current : 17.3mA
6. Board dimensions  :  180mm x 65mm (LxB)
7. Display dimensions   :   133mm x 40mm (LxB)

100-265 AC 200W/1200W Infrared Motion Sensor Switch

Specification:-

• Power source: 100-265V AC
• Power consumption: 0.5W (static 0.1W)
• Detection speed: 0.6 ~1.5m/s
• Time setting: Min: 10±2sec
• Max: 7±2min(adjustable)
• Light-control: <10~2000LUX(adjustable)
• Detection range: 6m Max (24°C)
• Detection angle: 120°(side view)360°(top view)
• Installation height: 2.5m~3.5m;
• Working temperature: -10°C~+40°C
• Working humidity: <93%RH

T856-C Power bank charging circuit module pack of 50pcs

Specification

1. Charging Voltage  :  5V DC
2. Charging Current  :  1000mA
3. USB Output Voltage  :  DC5V
4. USB Output Current  :  1200mA
5. Charging Interface  :  Micro USB port
6. LED indication

Coulometer Battery Capacity Tester 8V-80V Sampler 50A For Lithium Iron Phosphate

Specification

1. Display mode: LCD with backlight
2. Support voltage: 8-80V 
3. Standby power consumption: <0.15mA
4. Suitable batteries: lithium iron phosphate
5. Capacity range: 0-590Ah
6. Working current: 50A (0-75A)
7. Backlight color: green