SENSORS & MODULES

Reed switch sensor module

Specifications:-

1. Working voltage: 3.3V ~ 5V
2. Current: Up to 1.2A
3. Comparator output
4. Clean signal
5. Great waveform
6. Strong driving ability
7. Digital switch output (0 and 1)

Micro SD Card Reader Module

Specification :-

• Input Voltage: 3.3V/5V
• Current: 0.2~200mA
• Working voltage: VCC 4.5~5.5V
• Micro SDHC up to 32GB
• Supports Micro SD up to 2GB
• Pinouts: GND, VCC, MISO, MOSI, SCK, CS; SPI
• Micro SD Card Slot: Supports standard micro SD cards

PAM8610 10W+10W Two channel audio stereo amplifier modules pack of 50pcs

Specification

1. Operating voltage  :  7V to 15V (12V is suitable)
2. Current Rating : 2.5Amp
3. Power rating:  10W + 10W
4. Working Mode  :  Class - D
5. Chip name  :  PAM8610
6. Mute switch functionality
7. Low noise power amplifier
8. Does not require a heatsink

BH1750 - Light detection or Lux sensor module

Specifications:-

1. Power Supply : 2.4V-3.6V
2. Less current consumption : 0.12mA
3. Measuring Range : 1 - 65535lx
4. Very small effect of IR radiation
5. Responsive near to the human eye.

250V 16(8) 5M Cable Float Switch Sensor for Water Level Controller

Specification:-

• Cable length: 5m cable 
• Compatible Material: Plastic
• Floaty Water Level Controller
• Rated voltage: 250V
• High quality wire and Plastic Body

24V 4 channel relay module with light coupling

Specification:-

1. Number of channels: 4
2. Operating voltage: 24V
3. Max. current: 30mA
4. Trigger voltage: 24V
5. Switching voltage: 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

GD4142 Dual USB 5V 1A DC to DC step up boosters power bank charging modules pack of 50pcs

Specification:-

1. Input port type  :  Micro USB
2. Output port type  :   USB
3. Input Voltage  :  3.7V to 5V
4. Output parameters  :  5V 1A
5. 4 level LED lamp on back
6. Intelligent automatic shutdown

Micro USB B type Mike Patch straight plug adapter plate welding head breakout board pack of 1pcs

Specifications:-

1. 100% High quality and Branded product
2.  Base material : FR4
3. Number of pins : 5
4. Type : B type
5. Connector type : Female
6. Pin pitch size : 2.54mm
7. Used in wide range of application

9 mm Electret condenser microphone sound sensors pack of 20pcs

Specification:-

1. Operating Voltage  :  2V to 10V
2. Current consumption  :  0.5mA (max)
3. Recommended operating voltage  :  2V
4. Operating Frequency  :  20Hz to 16,000Hz
5. Impedance  :  <2.2kΩ
6. Package includes : 20 pieces

DHT 22/AM2302 Digital Temperature and Humidity Sensor

Specification:-

• Model: AM2302
• Supply Voltage: 3.3 to 5V
• Current: 5mA
• Humidity Range: 0-100%
• Humidity Accuracy: 2-5%
• Temperature Range: -40 to 80°C
• Temperature Accuracy: 0.5°C
• Sampling Rate: 0.5 Hz (Once every 2 seconds)

PD65W USB-C Type Fast Charging Module Board

Specification:-

• Voltage: 12V
• Output Power: 65W
• Board Thickness: 2mm
• Input Interface: USB Type-C
• Output Voltage Levels: 5V / 9V / 12V / 15V / 20V
• Charging Protocols Supported: PD3.1, QC3.0

4S 100A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 100A 
• Continuous Charge Current: 50A 
• Over-Voltage Protection: 3.75±0.05V  
• Balancing Current: 30±5mA  
• Charge Voltage: 14.6V 
• Working Temp: -20~70 °C 
• Working current: 500 uA 
• Model no. (118e)