SENSORS & MODULES

Smart BMS 3-4S 100A Same Port for Charge and Discharge (DP04S014)

Specification:-

• Cell specifications: 3~4 strings of LiFePO4 battery 
• Continuous current: 100A 
• Balance detect Voltage 3.8 
• Interface type: Charge and discharge are both at the same port 
• Charging voltage: 3.6V*Number of strings 
• Cell voltage range: 2.30~3.75V 
• Continuous charging current: 100A 
• Continuous discharging current: 100A 
• Model No.(73bb)

PAM8406 5Wx2 dual channel stereo Mini digital amplifier modules with volume control preset pack of 10pcs

Specification

1. Working voltage:  5V
2. Output power:  5W+5W
3. Dual channel stereo
4. High sound quality
5. Excellent noise suppression system
6. Can drive 4 and 8 omega speakers easily
7. Left and Right volume controller

5V-15V DC NE555 Pulse Frequency Duty Cycle Adjustable Module Square Wave Signal Generator

Specification:-

• Main chip: NE555
• Input Voltage: 5V-15V DC
• Maximum output current: 15MA
• Generate an adjustable pulse for MCU
• Generate an adjustable pulse, to control circuitry associated

FS IA6B 2.4GHz 6 Channel PPM with iBus Port Receiver

Specification:-

• Model: FS-iA6B
• Operating Voltage (VDC):4.0 ~ 8.4V
• No. of Channels:6
• No. of Band:140
• Encoding: GFSK.
• RF Range:2.4055–2.475 GHz.
• Video Format Supported: NTSC/PAL

110-240 AC 300W/1200W Automatic Infrared Motion Sensor Switch

Specification:-

• Power source: 110-240V AC
• Power consumption: 0.45W (static 0.1W)
• Time delay: Min: 8s±3sec
• Light-control: <3LUX(adjustable)
• Detection range: 12m Max (24°C)
• Detection angle: 180°
• Installation height: 1.8m~2.5m
• Working temperature: -10°C~+40°C
• Working humidity: <93%RH

3S 10A 11.1V 18650 Li-ion Lithium battery protection and charger BMS module pack of 5pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage: DC 13V
3. Current consumption: 10A
4. Overcharge detection voltage: 4.25 ± 0.025V
5. Overcharge release voltage: 4.19V±0.050V
6. Over discharge detection voltage range: 2.80 ± 0.10V
7. Over discharge release voltage: 3.0±0.10V
8. Low current consumption.
9. Stable performance.

3S 40A 12.6V 18650 Li-ion Lithium battery protection and charger BMS modules pack of 10pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage : DC 12.6V
3. Current consumption : 40A
4. Over charge detection voltage : 4.25 ± 0.025
5. Over charge release voltage : 3.80V±0.05V
6. Over discharge detection voltage range : 2.50 ± 0.08
7. Over discharge release voltage : 32.5±0.1V
8. Low current consumption.
9. Stable performance

3S 25A 12.6V 18650 Li-ion Lithium battery protection and charger BMS modules pack of 10pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage: DC 12.6V
3. Current consumption: 25A
4. Over charge detection voltage: 4.25 ± 0.025
5. Overcharge release voltage: 3.80V±0.05V
6. Over discharge detection voltage range: 2.50 ± 0.08
7. Over discharge release voltage: 32.5±0.1V
8. Low current consumption.
9. Stable performance.

16 x 1 Yellow/Green color LCD display module (JHD161A)

Specifications

1. Color of display: Green
2. Color of character: Yellow
3. Size : 16 x 1 (16 character x 1 rows)
4. Input voltage : +5V
5. Supply current : 1.2mA
6. Board dimensions  :  80mm x 36mm (LxB)
7. Display dimensions   :   65mm x 15mm (LxB)

MQ-4 Methane and smoke gas detector sensor module

Specifications:-

1. Operating voltage : 3V to 5V
2. Wide detecting scope
3. Fast response and High sensitivity
4. Stable and long life
5. Detect/Measure : Methane, Natural gases, etc.

LM2596 DC to DC Buck Converter Adjustable Step down power supply module pack of 100pcs

Specifications:-

1. Input voltage : 3V to 40V
2. Output voltage : 1.5V to 35V(Adjustable)
3. Output current : 2A to 3A
4. Module Properties : non-isolated constant voltage module
5. Rectification : non-synchronous rectification
6. Short circuit protection : current limiting

MQ-6 Butane, LPG and smoke detection sensor module

Specifications:-

1. Operating Voltage: +5V
2. Can be used to detect LPG or Butane gas
3. Analog output voltage: 0V to 5V
4. Digital Output Voltage : 0V or 5V (TTL Logic)
5. Preheat duration 20 seconds
6. Can be used as a Digital or analog sensor