SENSORS & MODULES

ACS712 - 20A range current detection sensor module

Specifications:-

• Measures both AC and DC current
• Provides isolation from the load
• Easy to integrate with MCU, since it outputs analog voltage
• Scale factor : 100mV/Amp

Smart BMS LiFePO4 15S 48V 100A Common Port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 15S 48V 100A
• Continuous Discharge Current: 80A 
• Over-Voltage Protection: 3.8V  
• Charge Current: 50A 
• Charge Voltage: 54.75V 
• Model no. (1627)

100μH 8A Ferrite Magnetic Inductor Coil 1mm Wire dia (20x10mm)

Specification:-

• Inductance: 100μH
• Core Material: Ferrite
• Outer Diameter: 20mm
• Height: 10mm
• Current Rating: 8A
• Wire Diameter: 1 mm
• Shape: Toroidal

16S 100A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 16S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 100A 
• Over-Voltage Protection: 3.8V  
• Balancing Current: 50mA  
• Charge Voltage: 58.4V 
• Model no. (10da)

MAX 6675 Module with K Type Thermocouple Sensor

Specification:-

• Operating Voltage: 3.0V to 5.5V
• Interface: SPI
• Resolution: 0.25°C
• Temperature Range(°C): 0 to +1024
• K-type temperature probe
• Application: For Arduino, Raspberry Pi etc.

AMS1117 4 pin 3.3V DC to DC step down power supply modules pack of 10pcs

Specifications:-

1. Working voltage: DC 4.5V – 12V (input voltage must be more than the output voltage (more than 1V))
2. Output: 3.3V, 800mA (load current cannot exceed 800ma)
3. Onboard AMS1117 chip
4. Onboard power indicator to indicate power is turned on: Color - RED
5. Small compact size
6. Breadboard friendly

DB9 Male Screw Terminal to RS232 RS485 Conversion Board

Specification:-

• Connector Type: DB9 Male
• Screw Terminal: 9
• Supported Protocols: RS232, RS485
• All-copper DR9 seat
• Mounting Hole(mm): 3 mm
• Dimensions: 40mm x 37mm x 15mm (approx)
• High-quality PCB material

Smart BMS LiFePO4 16S 48V 40A Common Port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 16S 48V 40A
• Continuous Discharge Current: 40A 
• Over-Voltage Protection: 3.8V  
• Charge Current: 20A 
• Charge Voltage: 58.4V 
• Model no. (2199)

2S 20A 8.4V 18650 Li-ion Lithium battery protection and charger BMS module pack of 5pcs

Specification:-

1. Brand new and reliable product
2. Power rating : 20A
3. Overcharge release voltage : 4.25V-4.35V±0.05V
4. Overcharging voltage range : 4.25±0.05V
5. Over-discharge voltage range : 2V-3V±0.1V
6. Low current consumption.
7. Stable performance

12v-40v to 7.5V 1A Mini Size DC Step-Down Module

Specifications:-

• Input voltage: 12V to 40V
• Output current: 1A
• Internal Soft-Start
• Short circuit protection: current limiting
• Module Properties: non-isolated constant voltage module

Smart BMS LiFePO4 4S 12V 60A Common port with Balance

Specification:-

• Battery Configuration: Smart BMS LiFePO4 4S 12V 60A
• Continuous Discharge Current: 60A 
• Over-Voltage Protection: 3.8V  
• Charge Current: 30A 
• Charge Voltage: 14.6V 
• Model no. (21a5)

40 x 4 Blue/White color LCD display module (JHD404A-4)

Specifications:

• Color of display : Blue
• Color of character : White
• Size : 40 x 4 (40 character x 4 rows)
• Input voltage : +5V
• Supply current : 3mA
• Board dimensions  :  190mm x 54mm (LxB)
• Display dimensions   :   148mm x 30mm (LxB)