SENSORS & MODULES
Showing 1–12 of 879 results
31-32.jpg)
.jpg)
.jpg)
.jpg)
-
![47μH 15A Ferrite Magnetic Inductor Coil 1.2mm Wire dia (20x10mm)]()
47μH 15A Ferrite Magnetic Inductor Coil 1.2mm Wire dia (20x10mm)
Rs. 99.00Specification:-
- Inductance: 47μH
- Core Material: Ferrite
- Outer Diameter: 20mm
- Height: 10mm
- Current Rating: 15A
- Wire Diameter: 1.2 mm
- Shape: Toroidal
-
![5A 12V Overcurrent Protection AC Current Detection Sensor Module]()
5A 12V Overcurrent Protection AC Current Detection Sensor Module
Rs. 349.00Specification :-
- Output mode: Switch signal output
- Operating voltage: DC12V
- Operating current: <20MA
- The current detection range: AC 0.3A-5A
- Operating frequency range: 20Hz ~ 400Hz
-
![7.8mm x 1.2mm (8mm x 1.5mm) Strong Silver Disc Shape Neodymium Magnet]()
7.8mm x 1.2mm (8mm x 1.5mm) Strong Silver Disc Shape Neodymium Magnet
Rs. 89.00Specification:-
- Material: Neodymium (NdFeB)
- Shape: Disc
- Dimensions: 7.8mm x 1.2mm (8mm x 1.5mm)
- Magnetization: Axial
- Operating Temperature: -40°C to +80°C
- Coating: Ni+Cu+Ni (Nickel Coated)
-
![Smart BMS LiFePO4 23S 72V 50A Common Port with Balance]()
Smart BMS LiFePO4 23S 72V 50A Common Port with Balance
Rs. 5609.00Specification:-
- Battery Configuration: Smart BMS LiFePO4 23S 72V 50A
- Continuous Discharge Current: 50A
- Over-Voltage Protection: 3.8V
- Charge Current: 25A
- Charge Voltage: 83.95V
- Model no. (46ca)
-
![T6845-B Power Bank Charging Circuit Module with 2-Pin JST Connector]()
T6845-B Power Bank Charging Circuit Module with 2-Pin JST Connector
Rs. 39.00Specification:-
- Charging Voltage: 5V DC
- Charging Current: 1 mA
- LED indication
- USB Output Voltage: DC5V
- USB Output Current: 1200 mA
- Charging Interface: Micro USB port
- Use Battery: 18650, 3.7V, 12000 mAh
-
![DRV8825 Stepper Motor Driver Module with Aluminum Heat Sink]()
DRV8825 Stepper Motor Driver Module with Aluminum Heat Sink
Rs. 149.00Specifications:-
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity: 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstepping: Full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
-
![6S 1A Li-Ion/LiFePO4 Active Balancer Hardware]()
6S 1A Li-Ion/LiFePO4 Active Balancer Hardware
Rs. 1099.00Specification:-
- Software active equalization specification
- Number of battery pack strings - 6S
- Balance current ≤1A
- Balance mode - Active equilibrium
- working temperature -20°C~60°C
- Model no. (48e9)
-
![4.5-24V To 0.8-17V DC to DC Step Down Converter]()
4.5-24V To 0.8-17V DC to DC Step Down Converter
Rs. 69.00Specification:-
- Input Voltage: DC 4.5-24V
- Adjustable Range: 0.8-17V, fixed voltage (1.8V, 2.5V, 3.3V, 5V, 9V, 12V)
- Output Current: 3A (max), Actual Testing Input: 12V Output: 1.5A
- Transform Efficiency: 97.5% (max) (6.5 to 5V 0.7A)
- Switch Frequency: 500KHz
- Output Ripple Wave: 20 mV (12V to 5V 3A) 20m bandwidth
-
![23S 50A BMS LFP Hardware Waterproof]()
23S 50A BMS LFP Hardware Waterproof
Rs. 3389.00Specification:-
- Battery Configuration: 23S for LiFePO4 (LFP) batteries
- Continuous Discharge Current: 50A
- Over-Voltage Protection: 3.8V
- Balancing Current: 50mA
- Charge Voltage: 83.95V
- Model no. (048f)
-
![16S 40A BMS LFP Hardware Waterproof]()
16S 40A BMS LFP Hardware Waterproof
Rs. 1549.00Specification:-
- Battery Configuration: 16S for LiFePO4 (LFP) batteries
- Continuous Discharge Current: 40A
- Over-Voltage Protection: 3.8V
- Balancing Current: 50mA
- Charge Voltage: 58.4V
- Model no. (10ac)
-
![6S 10A NMC Battery Protection and Charger BMS Hardware]()
6S 10A NMC Battery Protection and Charger BMS Hardware
Rs. 339.00Specification:-
- Input Voltage B+ to B-: -0.3~+20V
- Overcharge Detection voltage/1CELL: 4.28±0.05V
- Over discharge Detection voltage/1CELL: 2.8 ± 0.1 V
- Over current: 4-6A
- Suggest working temperature: -20°C~+60°C
- Model No.(115d)
-
![30mm x 10mm Strong Silver Disc Shape Neodymium Magnet]()
30mm x 10mm Strong Silver Disc Shape Neodymium Magnet
Rs. 289.00Specification:-
- Material: Neodymium (NdFeB)
- Shape: Disc
- Dimensions: 30mm x 10mm
- Magnetization: Axial
- Operating Temperature: -40°C to +80°C
- Coating: Ni+Cu+Ni (Nickel Coated)
.jpg)
