DRIVER IC

TM1628 Digital LED display driver 28 pin IC pack of 2pcs

Specification:-

1. Advance technology
2. Supply voltage : 5V to 7V
3. Logic input voltage : -0.5 to VD D + 0.5
4. Logic supply voltage : 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

LM3915 Logarithmic LED dot or bar display driver 18 pin IC pack of 2pcs

Specification

1. Analog controlled LED driver IC with logarithmic output
2. Operating Voltage :  3V to 25V
3. Reference Voltage :  1.2V to 12V
4. Power dissipation : 1365 mW
5. Number of pin : 18
6. Number of controllable LED's : 10
7. Drives LEDs, LCDs, or Vacuum Fluorescents

TM1628 Digital LED display driver 28 pins IC pack of 50pcs

Specification

1. Advance technology
2. Supply voltage: 5V to 7V
3. Logic input voltage: -0.5 to VD D + 0.5
4. Logic supply voltage: 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

AN6884 Logarithmic 5 dot LED driver SIP 9 pin IC pack of 2pcs

Specification

1. 5 dot LED bar logarithmic IC
2. Operating voltage range:  5V to 16 V
3. Circuit voltage: 6V
4. Supply current: 12A
5. Power dissipation:  1100mW
6. Constant current output:  15 mA
7. Inbuilt high gain amplifier: 26 dB
8. Number of pins: 9
9. Low noise immunity

LM3914 Logarithmic LED dot or bar display driver 18 pin IC pack of 2pcs

Specification

1. Analog controlled LED Driver IC
2. Number of controllable LEDs : 10
3. Operating voltage :  3V to 18V
4. Input analog voltage range : 1.2V to 12V
5. LED sink current :  2mA to 30mA (programmable)
6. Both Dot and Bar display mode available

2281 Dual channel LED lever meter driver monolithic DIP 16 pin IC pack of 2pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation: 600mW
4. Voltage gain: 13.4 dB
5. Capable of driving red, green, and yellow LEDs
6. High input impedance
7. Applicable to 10-dot mono output

B1403 5 dot red green LED lever meter driver SIP 9 pins IC pack of 10pcs

Specification

1.  Capable of generating a bar-display
2. Operates from either AC or DC input voltage
3. Type : SIP LED driver
4. Supply voltage : 6V to 16V
5. Power dissipation  : 1100mW
6. Low noise

2281 Dual channel LED lever meter driver monolithic DIP 16 pins IC pack of 10pcs

Specification

1. 100% Original and new product
2. Wide operating range:  5V to 14V
3. Power dissipation : 600mW
4. Voltage gain : 13.4 dB
5. Capable of driving red, green, and yellow LED's
6. High input impedance
7. Applicable to 10 dot mono output

MOC3021 Opto-isolator TRIAC driver DIP 6 pin IC pack of 2pcs

Specification

1. Forward current: 60mA
2. Power dissipation: 100mW
3. Off-state output terminal voltage : 400V
4. Peak repetitive surge current : 1A
5. Reverse voltage : 3V
6. Excellent IFT stability
7. High isolation voltage

B1403 5 dot red green LED lever meter driver SIP 9 pin IC pack of 2pcs

Specification

1.  Capable of generating a bar-display
2. Operates from either AC or DC input voltage
3. Type : SIP LED driver
4. Supply voltage : 6V to 16V
5. Power dissipation  : 1100mW
6. Low noise

HIP4082 80V 1.25A peak current H-bridge FET driver 16 pin IC pack of 2pcs

Specification

1. Supply voltage: 8.5V to 16V
2. Phase slew rate: 20V/ns
3. Operating current: 4A
4. Independently drives 4 N-Channel FET in half-bridge
5. Drives 1000pF load in free air at 50°C

LM3915N IC – LED Dot/Bar Display Driver IC

Specification

• Internal Voltage Reference from 1.2V to 12V 
• Operates with a Single Supply of 3V to 25V
• Storage Temperature Range: -55°C to 150°C
• Divider Voltage: -100mV to V+
• Voltage on Output Drivers: 25V