IC

L293D Quadruple half-H driver or motor driver 16 pin IC pack of 2pcs

Specification

1. Quadruple high current half-H driver IC
2. Or motor driver IC
3. Supply voltage : 5V to 7V
4. Output voltage : 5V to 36V
5. Max. current : 600mA
6. Number of pin : 16
7. Peak output current : 1.2A

24C08 8K Bit standard 2 wire bus interface serial DIP 8 pin IC pack of 2pcs

Specification

1. Low Voltage and Standard-Voltage Operation
2. 2-wire Serial Interface
3. Operating voltage : 2.7V to 5.5V
4. Clock frequency :  40KHz
5. Active current typical : 200µA
6. 100kHz and 400kHz Compatibility
7. 1024 x 8 bits for each

LM339 DIP-14/SOP-14 Voltage Comparator IC Pack of 5

Specification:-

• Supply Voltage: 36 VDC or ±18 VDC
• Very Low Supply Current Drain (0.4 mA)
• Independent of Supply Voltage
• Low Input Biasing Current: <250 nA

UPC1230H2 25W Audio power amplifier bipolar analog 12 pins IC pack of 10pcs

Specification

1. Supply voltage range: 9.5V to 18V
2. Operating voltage: 16V
3. Circuit current: 4.5A
4. Power dissipation: 20W
5. Load impedance: 3.2Ω to 16Ω

TDA7297 Dual channel 15W + 15W stereo audio power amplifier 15 pins IC pack of 10pcs

Specifications

1. Dual-channel amplifier IC
2. Stereo output: 15W + 15W
3. Operating voltage: 6V to 18V
4. Peak output current:  2A
5. Maximum quiescent current: 65mA
6. Closed-loop voltage gain:  33dB

CD4017 Decade counter noise immunity DIP 16 pin IC pack of 2pcs

Specifications:-

1. Type : Decade counter IC
2. Supply voltage range : 5V to 15V
3. Power dissipation : 700mW
4. Supports 10 decoded outputs
5. High noise immunity : 0.45
6. Low power : 10 µW
7. Maximum clock frequency :  5.5Mhz

TDA7265 Dual channel 25W + 25W stereo audio power amplifier 11 pins IC pack of 10pcs

Specification

1. Dual-channel amplifier IC
2. Stereo output: 25W + 25W
3. Operating voltage : 5V to 25V
4. Peak output current :  2A
5. Power dissipation : 30W
6. Output short circuit protection
7. Thermal overload protection

CD4052 4 Channel multiplexer and demultiplexer DIP 16 pin IC pack of 2pcs

Specification

1. Nominal voltage : 5V to 15V
2. Maximum operating voltage : 20V
3. Propagation delay : 400ns at 5V
4. Supports both analog and a digital voltage
5. 4:1 Multiplexer IC
6. 1:4 Demultiplexer IC

741 General Purpose Op-Amplifier IC

Specification:-

• Supply Voltage: ±22
• Input Voltage: ±15
• Differential Input Voltage: ±30
• Storage Temperature Range: −65 to +150
• Output short-circuit duration: Infinite

LM311 Differential comparator op-amp DIP 8 pins IC pack of 10pcs

Specification

1. Wide power supply Range
   1. Singe supply :  5V to 30V
   2. Dual supply : ±2.5V to ±15V
2. Maximum current : 7.5mA
3. Single supply for two op-amps enables reliable operation
4. Capable of driving load up to 50V and 50 mA

TM1628 Digital LED display driver 28 pins IC pack of 10pcs

Specification

1. Advance technology
2. Supply voltage : 5V to 7V
3. Logic input voltage : -0.5 to VD D + 0.5
4. Logic supply voltage : 4.5V to 5.5V
5. Low power consumption
6. Multi-display modes
7. Key scanning (8 x 2 matrix)

LM393 Low offset voltage dual comparator operational amplifier 8 pins IC pack of 10pcs

Specification

1. Dual comparator
2. Wide power supply range
   1.     Singe supply – 2V to 36V
   2.     Dual supply – ±1V to ±18V
3. A drain current of only 0.4mA
4. Input offset voltage: ±5mV maximum
5. Power dissipation: 660mW
6. Can drive most of the TTL and MOS loads