IC

TDA7297 Dual channel 15W + 15W stereo audio power amplifier 15 pins IC pack of 10pcs

Specifications

1. Dual-channel amplifier IC
2. Stereo output: 15W + 15W
3. Operating voltage: 6V to 18V
4. Peak output current:  2A
5. Maximum quiescent current: 65mA
6. Closed-loop voltage gain:  33dB

CD4052 4 Channel multiplexer and demultiplexer DIP 16 pin IC pack of 2pcs

Specification

1. Nominal voltage : 5V to 15V
2. Maximum operating voltage : 20V
3. Propagation delay : 400ns at 5V
4. Supports both analog and a digital voltage
5. 4:1 Multiplexer IC
6. 1:4 Demultiplexer IC

LM393 Low offset voltage dual comparator operational amplifier 8 pins IC pack of 10pcs

Specification

1. Dual comparator
2. Wide power supply range
   1.     Singe supply – 2V to 36V
   2.     Dual supply – ±1V to ±18V
3. A drain current of only 0.4mA
4. Input offset voltage: ±5mV maximum
5. Power dissipation: 660mW
6. Can drive most of the TTL and MOS loads

ATMEGA48PA 8-bit AVR Microcontroller with 4/8/16K8/16K bytes In-system DIP 28 pin IC

Specification

1. Core Size: 8-bit
2. Speed:  20MHz
3. Program memory size : 4KB
4. Program memory type :  Flash
5. EEPROM size : 256 x 8
6. RAM size : 512 x 8
7. Supply voltage : 1.8V to 5.5V

LM358 Dual operational amplifier 8 pins IC pack of 10pcs

Specifications

1. Dual operational amplifier
2. Number of amplifiers: 2
3. Number of pins: 8
4. Wide power supply Range
5. Singe supply: 3V to 32V
6. Dual supply: 1.5V to 16V
7. Low Supply current – 700uA
8. Short circuit protection outputs

LM311 Differential comparator op-amp DIP 8 pins IC pack of 10pcs

Specification

1. Wide power supply Range
   1. Singe supply :  5V to 30V
   2. Dual supply : ±2.5V to ±15V
2. Maximum current : 7.5mA
3. Single supply for two op-amps enables reliable operation
4. Capable of driving load up to 50V and 50 mA

34063API (608AY) DC to DC convertor DIP 8 pin IC

Specification

• Operation from 3.0 V to 40 V Input
• Low Standby Current 
• Current Limiting 
• Output Switch Current to 1.5 A 
• Output Voltage Adjustable
•  Frequency Operation to 100 kHz 
•  Precision 2% Reference

LM3915N IC – LED Dot/Bar Display Driver IC

Specification

• Internal Voltage Reference from 1.2V to 12V 
• Operates with a Single Supply of 3V to 25V
• Storage Temperature Range: -55°C to 150°C
• Divider Voltage: -100mV to V+
• Voltage on Output Drivers: 25V

PT2399 Digital delay echo audio processor DIP 16 pin IC pack of 2pcs

Specification

1. Audio echo processor IC for the digital delay
2. Supply voltage : 12V
3. Clock frequency  :  4MHz
4. Maximum Voltage gain :  2.5dB
5. Power Supply Rejection Ratio : -40dB

KA2224 Dual equalizer amplifier with ALC DIP 14 pin IC pack of 2pcs

Specification

1. Dual equalizer amplifier with in-built ALC circuit
2. Excellent channel separation
3. Supply voltage: 14V
4. Power dissipation: 600mW
5. ALC max. current: 3.5mA
6. Output voltage current: 1.2V

D6283 6 watt dual channel audio amplifier SIP 12 pins IC pack of 10pcs

Specification

1. 6-watt dual channel audio amplifier
2. Type: SIP
3. Number of pins : 12
4. Operating voltage : 6V to 15V
5. Output current : 2.5A
6. Power dissipation : 12.5W
7. Short circuit and thermal shutdown protection

LA3161 Dual channel stereo preamplifier SIP 8 pins IC pack of 10pcs

Specification

1. Dual-channel preamplifier
2. Type :  SIP
3. Number of pins : 8
4. Low noise
5. Supply voltage : 9V to 18V
6. Good ripple rejection
7. Power dissipation : 8mA