ALL ELECTRONICS COMPONENTS

BZV55-C9V1 (SMD) 9.1V 0.5 watt Zener diodes box of 2500pcs

Features:-

• Non-repetitive peak reverse power dissipation: ≤ 40 W
• Total power dissipation: ≤ 500 mW
• Voltage tolerance : ±5 %
• Working voltage : 9.1V
• Low differential resistance
• Small hermetically sealed glass SMD package

74LS194 4-bit Bi-directional Shift Register IC DIP-16 Package

Specification:-

• Number of pins: 16
• Supply Voltage (VCC): 7 V
• Input Voltage (VI): 7 V
• Operating free-air temperature range: 0°C to +70°C
• Storage temperature range: –65°C to +150°C

Electronic Spices 1000Pcs 68 Ohm (Ω) 2watt ±5% Tolerance 68 MR Ω ohm MF Through Hole Resistors Axial Lead

Specifications

1. Resistance : 68 ohm
2. Tolerance : 5%
3. Resistor type : carbon film
4. Power rating : 2W
5. Max. operating voltage : 180V to 240V

T1117-1.5 SOT 223 Voltage Regulator Pack of 2500pcs

Specification :-

1. High-Efficiency Linear Regulators
2. Post Regulators for Switching Supplies
3. Built-in thermal shutdown
4. Output Voltage- 1.485 - 1.515

DB, DB152 1.5A 100V Bridge Rectifiers Diode pack of 5pcs

Specification

1. Case : DB
2. Maximum respective peak reverse voltage : 100v
3. Maximum average rectified current : 1.5A
4. Maxim reverse current : 10.0µA
5. Non-Repetitive Peak Forward Surge Current : 50A
6. Maxim forward voltage : 1.1V

0.3 inch 2 digit Green display color 7 segment LED display COMMON ANODEs pack of 50pcs

Specification:-

1. Number of digit : 2
2. Display type : 7 segment
3. Configuration : common anode
4. Number of pins : 10
5. LED color : Green
6. Operating current : 10mA
7. Length of the LED : 15mm
8. Width of the LED : 14mm

CD4051 Single 8-channel Multiplexer/Demultiplexer IC (DIP-16 Package)

Specification:-

• Bandwidth: 20 MHz
• Supply curren: 0.04 uA
• 100% Tested for Quiescent Current at 20 V
• 5 V, 10 V, and 15 V Parametric Ratings
• Maximum Input Current of 1 µA at 18 
• Input/output continuous current (Max): 10 mA
• Temperature range : -55°C to 125°C

0.15μF 154J 250V CBB20 Axial-Type Metallized Polypropylene Film Capacitor Pack of 5pcs

Specification 

1. Reference standard : GB 10190 (IEC 384-16) 
2. Rated voltage : 250V 
3. Capacitance range : 0.0010 - 3.3 uf 
4. Capacitance tolerance : ±5%(J), ±10%(K), ±20%(M)
5. Voltage proof : 1.6UR (5S) 
6. Insulation resistance : ≥500000MΩ CR≤0.33uF
7. Dimensions of Diameter : 8.5mm
8. Dimensions of Length : 20.5mm

1.6M ohm 1206 High power SMD thick film chip resistors box of 5000pcs

Specifications

1. Case type : 1206
2. Resistance : 1.6M
3. Tolerance :  ± 5%
4. Power Rating (Watt) : 0.25W, 1/4W
5. Operating Temperature : -55 °C to +155 °C
6. Element type : Thick film chip
7. Operating voltage range : 180V to 220V

SMA(G), SK34 40V Surface Mount Schottky Barrier Rectifiers Diode Pack of 100

Specification

1. Case : SMA(G)
2. Maximum respective peak reverse voltage : 40v
3. Maximum average rectified current : 1.0A
4. Maxim reverse current : 0.5µA
5. Non-Repetitive Peak Forward Surge Current : 100A
6. Maxim forward voltage : 0.55V

47uf 35V Aluminum Electrolytic Capacitors (6.3 X 11 mm) pack of 5pcs

Specification

• Rating Voltage = 35V
• Material = Aluminum
• Capacitor Size = 6.3 x 11 mm
• Impedance (O)max. 20°C 1000KHz = 130
• Ripple current = 250
• DC Leakage Current = ≤ 0.01CV (µF) at 20°C
• Capacitance Tolerance = ±20%(M)
• Shelf Life = After storage for 1000Hrs at +105°C with no voltage applied, the capacitor shell meet the specified limits for “Load Life”.

TL084 Quad JFET Input Operational Amplifier IC (DIP-14 Package)

Specification:-

• Number of channels: 4
• Iq per channel: 1.4 (mA)
• Rail-to-rail In to V+
• Low Input Bias Current: 30 pA Typical
• Low Input Offset Current: 5 pA Typical
• Low Power Consumption: 1.4 mA/ch Typical