SENSORS & MODULES

RepRap Stepper Motor Driver Module A4988

Specifications:-

• Minimum operating voltage: 8V
• Maximum operating voltage: 35V
• Continuous current per phase: 1 Amp
• Maximum current per phase: 2 Amp
• Minimum logic voltage: 3V
• Maximum logic voltage: 5.5V
• Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16

3 USB 5V 1A Mobile power bank charger controllers modules pack of 50pcs

Specification:-

1. Charging Voltage:  5V DC
2. Charging Current:  1000mA or 1A
3. LED indication is provided
4. USB Output Voltage:  DC 5V
5. USB Output Current:  1200mA
6. Charging Interface  : 3 Micro USB port

2S 4A 3.7V 18650 Li-ion Lithium battery protection and charger BMS module JH886044 pack of 5pcs

Specification:-

1. Brand new and reliable product
2. Charging voltage : DC 8.4V
3. Current consumption : 4A
4. Overcharge detection voltage : 4.28±0.25V
5. Overcharge release voltage : 4.08±0.05V
6. Over-discharge detection voltage range : 2.9±0.10V
7. Over-discharge release voltage : 3.0±0.10V
8. Low current consumption.
9. Stable performance.

SW420 - Vibration detection sensor module

Specifications:-

1. Operating Voltage: 3.3V to 5V DC
2. Operating Current: 15mA
3. Bolt holes for easy installation
4. Small, cheap, and easily available
5. LEDs indicating output and power

MAX485 Module/RS-485 Converter Module for Arduino

Specifications:-

• IC chip : MAX485
• Operating voltage: 5V DC
• Slew-rate limited transceiver
• Low power consumption
• Convenient RS-485 communication wiring
• Multiple Units can be connected   

12v-40v to 9V 1A Mini Size DC Step-Down Module

Specifications:-

• Input voltage: 12V to 40V
• Output current: 1A
• Internal Soft-Start
• Short circuit protection: current limiting
• Module Properties: non-isolated constant voltage module

TTP224 - 4 channel Digital capacitive touch sensor module

Specifications:-

1. Onboard TTP224 capacitive touch sensor IC's
2. 4 board-level sensor indicator
3. Working voltage: 2.4V - 5.5V
4. Low power selection

PAM8403 HW104 5V Two channel stereo 3W+3W audio amplifier modules pack of 50pcs

Specification

1. 2 channels 3 W PAM8403 audio amplifier
2. Output Power:  3W + 3W
3. Working Voltage  :  2.5 to 5.5V
4. Board Size  :  22 x 18 mm
5. High amplification efficiency

Acrylic case enclosure box for W1209 temperature control module

Specifications

1. 100% Secure and High-quality product
2. Assembled Dimensions (L x W x H) : 59mm x 51mm x 18mm
3. Tested and reliable
4. Easy to assemble
5. High-quality Acrylic material build
6. Cover case box for W1209 module
7. Package includes : The module is not included

Wireless Headset Microphone System with ON-OFF Switch and Wireless Receiver Circuit Module

Specification:-

• Wireless Connectivity
• Microphone ON-OFF Switch
• Receiver Circuit Module
• Long Battery Life
• User-Friendly Operation

4S 100A BMS LFP Hardware Waterproof

Specification:-

• Battery Configuration: 4S for LiFePO4 (LFP) batteries 
• Continuous Discharge Current: 100A 
• Continuous Charge Current: 50A 
• Over-Voltage Protection: 3.75±0.05V  
• Balancing Current: 30±5mA  
• Charge Voltage: 14.6V 
• Working Temp: -20~70 °C 
• Working current: 500 uA 
• Model no. (118e)

4S 20A LFP LiFePO4 BMS Hardware Module with Connector

Specification:-

• Model TDT-4S-8181A 20A LFP 
• Input Voltage B+ to B-: -0.3~+15V 
• Overcharge Detection voltage/1CELL: 3.65±0.05V 
• Over discharge Detection voltage/1CELL: 2.32 ± 0.1 V 
• Charge temperature protection 0°C~+50°C 
• Discharge temperature protection 65°C~+75°C 
• Model No.(5226)