SENSORS & MODULES
Showing 1–12 of 853 results
.JPG)
.jpg)
-
![ADXL345-Tripple Axis Accelerometer Board]()
ADXL345-Tripple Axis Accelerometer Board
Rs. 149.00Specification:-
- Voltage - Supply: 3.3 V/ 5V.
- Sensing Range: ±2g, 4g, 8g, 16g.
- Digital Output: SPI / I2C
- Low Power Consumption
- Sensor Type: Accelerometer 3 Axis
-
![33μH 3A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (12x6mm)]()
33μH 3A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (12x6mm)
Rs. 29.00Specification:-
- Inductance: 33μH
- Core Material: Ferrite
- Outer Diameter: 12mm
- Height: 6mm
- Current Rating: 3A
- Wire Diameter: 0.6 mm
- Shape: Toroidal
-
![5mm RGB DIP LED Module]()
5mm RGB DIP LED Module
Rs. 39.00Specification:-
- Operating Voltage (VDC): 5
- LED Type and Size: RGB 5 mm
- LED drive mode: Common Cathode Driver
- The use of plug-in full-colour LED
- With a variety of single-chip interface
-
![LE-VAP 63A 230V Dual Display Voltage Current Protector with Auto Re-connect LED Display]()
LE-VAP 63A 230V Dual Display Voltage Current Protector with Auto Re-connect LED Display
Rs. 699.00Specification:-
- Model Name: LE-VAP 63A
- Voltage Rating: 220 VAC
- Under Volage: 80V TO 210V
- Over Voltage: 130V to 300V
- Current Capacity: 63A
- On Delay: Adjustable up to 999 Seconds
-
![47μH 5A Ferrite Magnetic Inductor Coil 0.7mm Wire dia (13x6mm)]()
47μH 5A Ferrite Magnetic Inductor Coil 0.7mm Wire dia (13x6mm)
Rs. 29.00Specification:-
- Inductance: 47μH
- Core Material: Ferrite
- Outer Diameter: 13mm
- Height: 6mm
- Current Rating: 5A
- Wire Diameter: 0.7 mm
- Shape: Toroidal
-
![100-265 AC 200W/1200W Infrared Motion Sensor Switch]()
100-265 AC 200W/1200W Infrared Motion Sensor Switch
Rs. 399.00Specification:-
- Power source: 100-265V AC
- Power consumption: 0.5W (static 0.1W)
- Detection speed: 0.6 ~1.5m/s
- Time setting: Min: 10±2sec
- Max: 7±2min(adjustable)
- Light-control: <10~2000LUX(adjustable)
- Detection range: 6m Max (24°C)
- Detection angle: 120°(side view)360°(top view)
- Installation height: 2.5m~3.5m;
- Working temperature: -10°C~+40°C
- Working humidity: <93%RH
-
![4S 80A BMS LFP Hardware Waterproof]()
4S 80A BMS LFP Hardware Waterproof
Rs. 2289.00Specification:-
- Battery Configuration: 4S for LiFePO4 (LFP) batteries
- Continuous Discharge Current: 80A
- Continuous Charge Current: 40A
- Over-Voltage Protection: 3.75±0.05V
- Balancing Current: 30±5mA
- Charge Voltage: 14.6V
- Working Temp: -20~70 °C
- Working current: 500 uA
-
![LM393 Linear Hall Effect Sensor Module]()
LM393 Linear Hall Effect Sensor Module
Rs. 39.00Specification:-
- Operating voltage: 2.3V-5.3V
- GND: power supply ground
- AOUT (analog sensor output): Arduino/ MCU input
- DOUT (digital sensor output): Arduino/MCU input
- Signal output indicator
- Analog / Digital Output
-
![68μH 4A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (13x6mm)]()
68μH 4A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (13x6mm)
Rs. 29.00Specification:-
- Inductance: 68μH
- Core Material: Ferrite
- Outer Diameter: 13mm
- Height: 6mm
- Current Rating: 4A
- Wire Diameter: 0.6 mm
- Shape: Toroidal
-
![5V 1 Channel Relay Module with High & Low Trigger Option]()
5V 1 Channel Relay Module with High & Low Trigger Option
Rs. 500.00Specification:-
- Number of channels: 1
- Supply voltage: 3.75V to 5V
- Quiescent current: 2mA
- Trigger voltage: 5V
- Trigger current: 20mA
- Current when the relay is active: 70mA
- Relay maximum contact voltage: 250V AC or 30V DC
- Relay maximum current: 10A
- Product size: 50 x 25mm
-
![47μH 3A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (12x6mm)]()
47μH 3A Ferrite Magnetic Inductor Coil 0.6mm Wire dia (12x6mm)
Rs. 29.00Specification:-
- Inductance: 47μH
- Core Material: Ferrite
- Outer Diameter: 12mm
- Height: 6mm
- Current Rating: 3A
- Wire Diameter: 0.6 mm
- Shape: Toroidal
-
![4.5-24V To 0.8-17V DC to DC Step Down Converter]()
4.5-24V To 0.8-17V DC to DC Step Down Converter
Rs. 69.00Specification:-
- Input Voltage: DC 4.5-24V
- Adjustable Range: 0.8-17V, fixed voltage (1.8V, 2.5V, 3.3V, 5V, 9V, 12V)
- Output Current: 3A (max), Actual Testing Input: 12V Output: 1.5A
- Transform Efficiency: 97.5% (max) (6.5 to 5V 0.7A)
- Switch Frequency: 500KHz
- Output Ripple Wave: 20 mV (12V to 5V 3A) 20m bandwidth