SENSOR MODULES
Showing 1–12 of 133 results
-
![Turbidity Sensor Module with Board]()
Turbidity Sensor Module with Board
Rs. 699.00Specifications:-
- Working Voltage: 5V DC
- Current: 30mA (MAX)
- Response Time: <500mS
- Insulation Resistance: 100MΩ (Min)
- Operating temperature: -30 ° C to 80 ° C
-
![Infrared Eye Blink Sensor with Goggles]()
Infrared Eye Blink Sensor with Goggles
Rs. 149.00Specification:-
- TTL output 5V or 0V
- This module works on +5 V DC.
- Three pins GND (ground), 5V, OP (output)
- EYE BLINK indication by LED
- Can be used for counting the Eye Blinking frequency of a person.
-
![W5500 Ethernet Network Modules for Arduinos]()
W5500 Ethernet Network Modules for Arduinos
Rs. 549.00Specifications
- Type: Drive IC
- 3.3 V or 5 V level.
- LAN Ethernet: 10/100Mbps
- Module test: test software
- W5500 hardware initialization pen
-
![Normally Closed Vibration Sensor Switch]()
Normally Closed Vibration Sensor Switch
Rs. 29.00Specifications:-
- High sensitivity
- Moisture-proof
- Dust-proof
- Open resistance : 10M Ohm
- Closed resistance: 10 Ohm
-
![3kg Load Cell Weighing Scale Sensor With Wire]()
3kg Load Cell Weighing Scale Sensor With Wire
Rs. 129.00Specification:-
- Material: Aluminum
- Capacity: 3kg (3000 grams)
- Operating Voltage: 5v to 10v
- Rated Output: 1.0 ± 0.1mV / V
- Input Impedance: 1066 ± 10% Ω
- Output Impedance: 1000 ± 10% Ω
- Operating Temperature Range: -21º ~ 40º C
-
![PCF8574T I2C I/O Extension Board Module]()
PCF8574T I2C I/O Extension Board Module
Rs. 99.00Specification:-
- Operating Voltage (VDC): 3V~ 5V
- Based on PCF8574 Chip
- Interface: I2C
- Ports: 8-bit Parallel Ports
- Can be used with Arduino as well as Raspberry Pi
-
![I2C 2 Channel Logic Level Converter with Regulator Module]()
I2C 2 Channel Logic Level Converter with Regulator Module
Rs. 39.00Specification:-
- AVCC = 5V input
- BVCC = 3.3V output
- ASCL / BSCL = I2C Clock Channel
- ASDA / BSDA = I2C Data Channel
- GND = Ground (x2). At least one needs to connect to 5V ground.
-
![KY-036 Metal Touch Sensor Module Responds To The Light Indicating Touch]()
KY-036 Metal Touch Sensor Module Responds To The Light Indicating Touch
Rs. 69.00Specifications: -
- Type Working voltage: 3.3V to 5.5V
- Type Current consumption: 10mA
- Type Output: Analog and digital
- Type Sensitivity: Adjustable
- Type Dimensions: 43 x 16 mm
-
![IRF540 Isolation Power Module Electronic Block 4-Channel MOSFET Switch]()
IRF540 Isolation Power Module Electronic Block 4-Channel MOSFET Switch
Rs. 299.00Specification:-
- MOSFET Type: IRF540
- Number of Channels: 4
- Control Voltage: 3.3V to 5V DC
- Load Voltage: Up to 100V DC
- Load Current: Up to 33A per channel
-
![TB-3A 12V Touch Sensor Switch For Mirror Light]()
TB-3A 12V Touch Sensor Switch For Mirror Light
Rs. 199.00Specification:-
- Input voltage: DC12V
- Output voltage: 3A
- Circuit Type: 1 Way
- Touch Type: Capacitive
- Number of Module: 1 Module
-
![RDM 6300-125KHZ EM4100 RFID Card Reader Module]()
RDM 6300-125KHZ EM4100 RFID Card Reader Module
Rs. 299.00Specification:-
- Frequency: 125KHZ
- Humidity: 0~95%
- Working voltage: DC 5V(+/-5%)
- Interface: TTL level RS232 format
- Working temperature: -10°C~+70°C
-
![LM393 Linear Hall Effect Sensor Module]()
LM393 Linear Hall Effect Sensor Module
Rs. 39.00Specification:-
- Operating voltage: 2.3V-5.3V
- GND: power supply ground
- AOUT (analog sensor output): Arduino/ MCU input
- DOUT (digital sensor output): Arduino/MCU input
- Signal output indicator
- Analog / Digital Output
