SENSORS & MODULES

AM8403 HW104 5V Two Channel Stereo 3W+3W Audio Amplifier Module with JST Connector

Specification:-

• 2 channels 3 W PAM8403 audio amplifier
• Output Power: 3W + 3W
• Working Voltage: 2.5 to 5.5V
• Board Size: 22 x 18 mm 
• JST Connector
• High amplification efficiency

MQ-5 Gas leakage detection sensor module

Specifications:-

1. Working voltage: 3V to 5V
2. Detecting concentration: 10000ppm
3. Sensing Resistance: 60kΩ
4. Heating consumption: 800mW

ACS712 - 5A range Current detector Sensor Module

Specifications:-

1. Module Dimensions: 31 x 13 x 14 mm (LxWxH)
2. Weight: 3 gm.
3. Supply Voltage: 4.5V~5.5V DC
4. Measure Current Range: -5A~ 5A
5. Sensitivity: 66mV/A
6. The current sensor chips: ACS712_ELC-05B.
7. Pin 5V power supply, on-board power indicator.

20 x 4 Yellow/Green color LCD display module (JHD204A)

Specifications

1. Color of display: Green
2. Color of character: Yellow
3. Size : 20 x 4 (20 character x 4 rows)
4. Input voltage : +5V
5. Supply current : 8mA
6. Board dimensions  :  98mm x 60mm (LxB)
7. Display dimensions   :   76mm x 25mm (LxB)

20 x 4 Jumbo Yellow/Green color LCD display module (JHD762M5)

Specifications

1. Color of display: Green
2. Color of character: Yellow
3. Size : 20 x 4 (20 character x 4 rows)
4. Power supply : +5V
5. Operating current : 8mA
6. Board dimensions  :  146mm x 62mm (LxB)
7. Display dimensions   :   124mm x 43mm (LxB)

4S 30A LFP LiFePO4 BMS Module with Balance Hardware

Specification:-

• Model TDT-4S-8181A 30A LFP 
• input Voltage B+ to B-: -0.3~+15V 
• Overcharge Detection voltage/1CELL: 3.65±0.05V 
• Over discharge Detection voltage/1CELL: 2.32 ± 0.1 V 
• Charge temperature protection 0°C~+50°C 
• Discharge temperature protection 65°C~+75°C 
• Model No.(47bf)

12V 8 channel relay module with light coupling

Specification:-

1. Number of channels : 8
2. Operating voltage : 12V
3. Max. current : 20mA
4. Trigger voltage : 12V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

250V 16(8) 3M Cable Float Switch Sensor for Water Level Controller

Specification:-

• Cable length: 3m cable 
• Compatible Material: Plastic
• Floaty Water Level Controller
• Rated voltage: 250V
• High quality wire and Plastic Body

RC522 RFID Card Reader Module 13.56MHz

Specification:-

• Working Current @ 3.3V: 13 – 26mA
• Standby Current @ 3.3V: 10 – 13mA
• Sleep Current: <80μA
• Peak Current: <30mA
• Working Frequency: 13.56MHz
• Card Reading Distance: 0-60mm
• Communication Protocol: SPI
• Data Communication Speed: 10Mbit/s Max

MPR121 V12 Capacitive touch sensor controller module

Specification:-

1. Operating voltage  :  2.5V to 3.6V DC
2. 29μA supply current at 16ms sample period
3. Shutdown current  :  3μA
4. 12 electrodes
5. Operating temperature range  :  -40°C to +85°C

24V 1 channel relay module with light coupling

Specification:-

1. Number of channels : 1
2. Operating voltage : 24V
3. Max. current : 30mA
4. Trigger voltage : 24V
5. Switching voltage : 250V at 10A
6. Equipped with high-current relay
7. It can control both AC and DC appliances such as Motors, lights, fans, etc.

RS485 12-24V PH Soil Detector Moisture Sensor

Specification:-

• Type: Soil Moisture Sensor
• Power Supply: 12-24V Dc
• Soil temperature: -40-80°C
• Soil temperature: ±0.5°C
• Conductivity: ±5%
• NPK: ±2%FS
• Soil temperature: 0.1°C
• Conductivity: 1us/cm